D-Link DGE-530T プリント

ページ / 2
BUSINESS AND 
ENTERPRISE 
SOLUTIONS 
BUSINESS AND ENTERPRISE 
SOLUTIONS 
Business And Enterprise Solutions 
DGE-530T 
High Performance, Low Profile Gigabit Network Card 
32bit 10/100/1000Mbps PCI Adapter 
DGE-530T 
High Performance: 
-32bit PCI BUS Master 
-PCI 2.2 Plug-and-Play Support 
-Auto-negotiating 10/100/1000Mbps 
-Full Duplex 20/200/2000Mbps 
-Half Duplex 10/100Mbps 
Advanced Standards Based 
Enterprise Features: 
-802.1p Priority Tagging 
-802.1q VLAN Tagging 
-Integrated Cable Diagnostics 
-SNMPv1 Support 
-ACPI 2.0 Wake-On-LAN 
Supported Driver List: 
-Windows 98SE/ME, 2000 & XP 
-Novell Netware 4.2, 5.x, 6.x 
-Red Hat Linux 7.3 & Later 
(Kernel 2.4.18 and Later) 
Support Information: 
-Limited-Lifetime Warranty* 
-Free Technical Support* 
-See Website For Latest Drivers 
*See Website For Complete Details 
Product Data Sheet 
The D-Link DGE-530T is a 10/100/1000Mbps copper Gigabit PCI card for servers and 
workstations. Current systems running at 10Mbps and 100Mbps can be upgraded to 
Gigabit Ethernet, eliminating network bottlenecks, and increasing productivity. Integrate 
Gigabit now and you can save time, money, and downtime because the DGE-530T will 
automatically detect and run at higher speeds when it becomes available. 
Cost-Effective, Scalable Migration 
As an inexpensive alternative solution to fiber-optic, the card allows you to instantly 
upgrade to Gigabit without requiring you to install new, expensive fiber cables. Gigabit 
Ethernet uses your existing Category-5 cabling while providing you with 10/100/ 
1000Mbps network speed auto-sensing and full/half duplex auto-negotiation. 
Advanced Features and Security 
The DGE-530T supports SNMP for remote troubleshooting and management, ACPI for 
lower power consumption, and WoL for remote wake. This helps to lower total cost of 
ownership (TCO). The card also features on-board screening of VLAN Tagged Ethernet 
frames, allowing you to assign multiple subnets to each server and isolate devices within 
each VLAN from the rest of the network for better traffic control and security. It also 
supports 802.1p Priority Tagging to allow you to prioritize traffic. The card also features 
embedded flow control and independent FIFO, providing a means to protect against 
possible data loss during transmission on the network. With the Cable Diagnostic feature, 
the card will automatically detect whether you have a bad cable, making your 
troubleshooting task easier.