U Reach CONRAD SATA-FESTPLATTEN-CLONER/ERASER PRO118 ユーザーズマニュアル
製品コード
PRO118
43
e) Display Information, Firmware Update
• Use the buttons “UP” (5) or “DOWN” (6) to select the menu item “5.Utility”.
• Push the button “OK” (7) to call the associated submenu.
• Use the buttons “UP” (5) or “DOWN” (6) to select the desired function.
• Use the buttons “UP” (5) or “DOWN” (6) to select the desired function.
“1. Show HDD Info.” = Display the memory capacity and the
hard disc model
hard disc model
“2. Update System” = Perform Firmware update
“3. System Info” = Display Firmware version
• Confirm your selection by briefly pressing the button “OK” (7).
“1. Show HDD Info.” = Display the memory capacity and the hard disc model
• After selecting this function and confirming with the button “OK” (7), the yellow LEDs (12) will
light up and the two hard discs are supplied with power.
• The copy station initially reads the memory capacity and the hard disc model of the source
hard disc (“Source”) and displays them.
In the above example, the hard disc is an older “WDC D1600” with 160 GByte.
HDD Duplicator
5.Utility
[5.Utility]
1.Show HDD Info.
[5.Utility]
2.Update System
[5.Utility]
3.System Info
[01]149G WDC
WD1600BMVS
[5.Utility]
1.Show HDD Info.