U Reach CONRAD SATA-FESTPLATTEN-CLONER/ERASER PRO118 ユーザーズマニュアル

• Operation is only permissible in dry indoor areas. The device must not become

damp or wet! For the mains adapter/mains cable there is also the deadly peril of
an electric shock!

• Never use the product immediately after it was taken from a cold into a warm

environment. The condensation generated may destroy the product. Moreover,
there is the risk of a fatal electric shock!
Let the product reach room temperature before connecting and using it. This may
take several hours.

• Servicing or repair must only be carried out by a specialist/specialist workshop.

Never disassemble the product!

• Check the product for damage before each use.

If any damage is found, the product must not be connected and used!
It can be assumed that safe operation is no longer possible if:
- the product is visibly damaged
- the product does not work properly or not at all anymore (e.g. smell of fire)
- the product was stored under unfavourable conditions

• When setting up the product, make sure that the cables are neither bent nor

pinched.

• If the product is not to be used for an extended period, (e.g. for storage),

disconnect the mains adapter from the mains voltage.

• The following unfavourable conditions are to be avoided at the place of installation

or during transport:
- dampness or high humidity
- extreme cold or heat
- dust or flammable gases, fumes or solvents
- strong vibration