U Reach CONRAD SATA-FESTPLATTEN-CLONER/ERASER PRO118 ユーザーズマニュアル

4

Function

Description

1. Copy

To copy source HDD to multiple target HDDs. Refer to function 6.Setup for 3 different copy

mode selection.

2. Compare

To compare data bit by bit between source and copied HDDs.

3. Copy+Compare

It makes copy first and then compare copied HDD with source HDD to ensure data

correctness.

4. Erase

Note: Function 6.3 can select to

erase source HDD or not

4.1 Quick Erase

Erase HDD’s index table only, it takes short time to execute this function.

4.2 Full Erase

Erase the whole HDD content.

4.3 DoD erase

Erase HDDs three times complying with USA Department of Defense (DoD) standard.

4.4 DoD EraseComp

Erase HDDs three times complying with n USA Department of Defense (DoD) standard

and bit by bit to check if data is completely erased.

5. Utility

5.1 Show HDD info

Shows HDD’s basic information such as HDD model name and capacity

5.2 Update System

5.2.1 Update BIOS

To update the system firmware via the HDD.

5.2.2 Format HDD

To format the HDD with a 2GB FAT partition in order to

quickly save firmware in the HDD.

5.3 System Info

This function will show information of the duplicator system, including controller model

number and software version.

6. Setup

6.1 Copy Area

Setup copy mode.

6.1.1 System and files

Set to copy source HDD's data area only.

6.1.2 ALL partition

Set to copy source HDD's all partitions.

6.1.3 Whole HDD

Set to copy the whole source HDD.

6.2 Skip Error

Set to ignore error of source HDD while copying. (0 -100 Set to ignore error of source HDD.)

6.3 Erase Master

Setup to erase source HDD or

not.

6.3.1 Disable

Disable erase source HDD.

6.3.2 Enable

Enable erase source HDD.

6.4 Unknown Format

6.4.1 Copy unknown

Copy unknown area when the device can not identify

the format.

6.4.2 Skip unknown

Skip copy unknown area when the device can not

identify the format.

6.5 Transfer Rate

Select the proper transfer rate UDMA2-7. 7 is the fastest.

6.6 Erase Pattern

6.6.1 ONE Byte

A random character to be written into every byte.

6.6.2 4MB Byte

A set of random character to be written into a set of

area.

6.7 Language

English / Japanese

6.8 Restore Default

Back to original manufacturer setting.