Imc MIT 30 motorcycle intercom system 3067 ユーザーズマニュアル
製品コード
3067
NOTE:
Cellular phones equipped with a 2,5 mm universal-jack, can be connected directly with
the 2,5 mm angle-entry-plug of the telephone connection cable. If your cellular phone
is not equipped as described before, a optional available cellular phone headset adapter is
required.
4.1.2. Audio Connection
Connect the 3,5 mm plug with the 3,5 mm jack(referring marked cable).
Next connect the 3,5 mm angle-entry-plug into the headphone-bush of
the unit (e.g.MP-3-Player,Radio,Walkman)
NOTE: Attention ! To avoid that the battery will get weak please disconnect
the 12 V plug from the motorcycle jack.
4.1.3. Helmet Speaker Set Connection
Connect the helmet speaker set spiral-extension cable with your helmet speaker
set and the Multi-function-box (driver/passenger is marked).
The sets are made of two high-performance, extra-flat Hifi-Loudspeakers in soft
loudspeaker-pads and a specially microphone-capsule ( which is steaming the
wind- noises). The Loudspeakers and the Microphone are fitted with a tape device
and are enabled to do a simple mounting.
According of law it is not allowed to take headsets which enclosed the ears complete!
That means, you put up the loudspeakers into the helmet (on to the upholstery)
with a little, lateral distance to the ear. So it is possible to hear the other acoustics
traffic noises.
To obtain an optimal language quality, please build in the microphone very near
to your mouth into the helmet.
NOTE: The connecting pieces are water-resistant and corresponding marked
with arrows.
4.1.4. 12 V Power Supply Connection
Connect the 12 V plug with the 12 V power supply jack of your motorcycle
4.2.Functions:
4.2.1. Telephone Function
After you have done the above described connections choose out of your cellular
phone menu the function that automatically accepts a phone call (like hands-free
use in car) . The referring symbol will be shown in the display. Choose the best
volume level. When you reach a call it will automatically be accepted.
In case you are using the audio connection at the same time, the audio signal will
automatically be reduced when a call is accepted. In moments of no telephone
conversation the audio signal will be increased again (ca.15 seconds delay).
Telephone Function can only be used by that person (driver or passenger), who
is using the helmet speaker set with the marked cable.
NOTE: Audio signal will also be heard by the caller!
4.1.3. Helmet Speaker Set Connection
Connect the helmet speaker set spiral-extension cable with your helmet speaker
set and the Multi-function-box (driver/passenger is marked).
The sets are made of two high-performance, extra-flat Hifi-Loudspeakers in soft
loudspeaker-pads and a specially microphone-capsule ( which is steaming the
wind- noises). The Loudspeakers and the Microphone are fitted with a tape device
and are enabled to do a simple mounting.
According of law it is not allowed to take headsets which enclosed the ears complete!
That means, you put up the loudspeakers into the helmet (on to the upholstery)
with a little, lateral distance to the ear. So it is possible to hear the other acoustics
traffic noises.
To obtain an optimal language quality, please build in the microphone very near
to your mouth into the helmet.
NOTE: The connecting pieces are water-resistant and corresponding marked
with arrows.
4.1.4. 12 V Power Supply Connection
Connect the 12 V plug with the 12 V power supply jack of your motorcycle
4.2.Functions:
4.2.1. Telephone Function
After you have done the above described connections choose out of your cellular
phone menu the function that automatically accepts a phone call (like hands-free
use in car) . The referring symbol will be shown in the display. Choose the best
volume level. When you reach a call it will automatically be accepted.
In case you are using the audio connection at the same time, the audio signal will
automatically be reduced when a call is accepted. In moments of no telephone
conversation the audio signal will be increased again (ca.15 seconds delay).
Telephone Function can only be used by that person (driver or passenger), who
is using the helmet speaker set with the marked cable.
NOTE: Audio signal will also be heard by the caller!