JVC KD-R862BTE ユーザーズマニュアル

ページ / 52
Data Size: 
B6L (182 mm x 128 mm)
Book Size: 
B6L (182 mm x 128 mm)
2
CONTENTS
BEFORE USE
 Warning
  Do not operate any function that takes your attention away from safe driving.
 Caution
Volume setting:
•  Adjust the volume so that you can hear sounds outside the car to prevent accidents.
•  Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of 
the output level.
General:
•  Avoid using the external device if it might hinder safe driving.
•  Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded 
data.
•  Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short 
circuit.
•  If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to 
evaporate.
•  USB rating is indicated on the main unit. To view, detach the faceplate. (  3)
Remote control (RM-RK52):
•  Do not leave the remote control in hot places such as on the dashboard.
•  The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or 
equivalent type.
•  The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
•  Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used 
batteries promptly. If swallowed, contact a physician immediately.
BEFORE USE 
2
BASICS 3
GETTING STARTED 
4
CD / USB / iPod / ANDROID 
5
RADIO 7
AUX 8
BLUETOOTH® 9
AUDIO SETTINGS 
14
DISPLAY SETTINGS 
17
MORE INFORMATION 
18
TROUBLESHOOTING 20
SPECIFICATIONS 22
INSTALLATION / 
CONNECTION 24
How to read this manual
•  Operations are explained mainly 
using buttons on the faceplate of 
KD-R861BT.
•  English language is used for 
the display explanation in this 
manual.
• [XX] indicates the selected items.
•  (  XX) indicates references are 
available on the stated page.
Maintenance
Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector 
gently with a cotton swab, being careful not to damage the connector.
Handling discs:
•  Do not touch the recording surface of the disc.
•  Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
•  Do not use any accessories for the disc.
•  Clean from the center of the disc and move outward.
•  Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
•  When removing discs from this unit, pull them out horizontally.
•  Remove burrs from the center hole and disc edge before inserting a disc.
Connector (on the reverse 
side of the faceplate)
JS_JVC_KD_R961BT_E_EN_1.indd   2
JS_JVC_KD_R961BT_E_EN_1.indd   2
23/7/2014   1:45:05 PM
23/7/2014   1:45:05 PM