Sangean DPR-99+ DPR99 データシート

19

Your radio will normally scan for FM broadcasts which are strong

enough to give good reception. However, you may wish the

Auto-scan function to also be able to find weaker signals, possibly from

more distant radio transmitters. Your radio includes a local / distant

option for the Auto-scan function.

1. Press the On/Off button to switch on your radio.

2. If needed, press the Band button to select the FM band.

3. Press and hold the Info/Menu button until the display shows

    “Mono override” on the lower line.

4. Press and release the Tuning Up or Down buttons until the display

    shows “FM Scan Zone” then press the Select button to enter the

    scan zone selection menu.

5. Press the Tuning Up or Down buttons to switch between Local and

    Distant options on the lower line of the display. The Distant option will

    allow the radio to find weaker signals when scanning.

6. Press the Select button to confirm your selection. The radio will then

    revert to the normal information display. The Local or Distant setting

    is stored in the radio and remains in force until changed or until a

    System Reset.

Note:

The initial setting (out of the box, or after a System Reset) causes

the radio to ignore weak (distant) signals.