3com 4210 PWR 9-Port 3CR17341-91-ME ユーザーズマニュアル

n 

■

If the system information is output before you input any information following 
the current command line prompt, the system does not echo any command 
line prompt after the system information output.

■

In the interaction mode, you are prompted for some information input. If the 
input is interrupted by system output, no system prompt (except the Y/N string) 
will be echoed after the output, but your input will be displayed in a new line.

To add UTC time zone to the time stamp in the information center output 
information, you must:

■

Set the local time zone

■

Set the time stamp format in the output direction of the information center to 
date

■

Configure to add the UTC time zone to the output information

Table 342   Configure synchronous information output

Enter system view 

system-view 

- 

Enable synchronous 
information output 

info-center synchronous 

Required

Disabled by default

Table 343   Configure to display time stamp with the UTC time zone

Set the time zone for the 
system

clock timezone zone-name { 
add | minus } time

Required

By default, UTC time zone is 
set for the system.

Enter system view

-

Set the time 
stamp format 
in the output 
direction of 
the 
information 
center to date

Log host 
direction

Required

Use either command

Non log 
host 
direction

Set to display the UTC 
time zone in the output 
information of the 
information center

Required

By default, no UTC time zone 
is displayed in the output 
information

Table 344   Set to output system information to the console

Enter system view 

system-view 

- 

Enable the information center  info-center enable 

Optional

Enabled by default.