Cellpack Power-Gel/400ml/EGH/DE 335120 データシート
製品コード
335120
EC safety data sheet
Trade name: Powergel-2 Komponente Komp.A
Product no.: F1
Current version : 2.1.1, issued: 20.11.2013
Replaced version: 2.1.0, issued: 09.01.2013
Region: GB
Page 3 of 8
SECTION 7: Handling and storage
7.1
Precautions for safe handling
Advice on safe handling
Open and handle container with care. Ensure adequate ventilation. Keep container tightly closed.
Open and handle container with care. Ensure adequate ventilation. Keep container tightly closed.
General protective and hygiene measures
Observe the usual precautions when handling chemicals. Do not eat or drink during work - no smoking. Wash hands
before breaks and after work. Ensure sufficient room ventilation.
Observe the usual precautions when handling chemicals. Do not eat or drink during work - no smoking. Wash hands
before breaks and after work. Ensure sufficient room ventilation.
Advice on protection against fire and explosion
Product may split off hydrogen. May form explosive mixtures in partially empty containers. Keep away from sources of
ignition - refrain from smoking. Take precautionary measures against static charges.
Product may split off hydrogen. May form explosive mixtures in partially empty containers. Keep away from sources of
ignition - refrain from smoking. Take precautionary measures against static charges.
7.2
Conditions for safe storage, including any incompatibilities
Technical measures and storage conditions
Keep containers dry and cool.
Keep containers dry and cool.
Requirements for storage rooms and vessels
Keep in original packaging, tightly closed.
Keep in original packaging, tightly closed.
Advice on storage assembly
Do not store together with: Alkalis; Amines; Ammonia; Alcohols; Oxidizing agents; Acids; Protect against humidity
Do not store together with: Alkalis; Amines; Ammonia; Alcohols; Oxidizing agents; Acids; Protect against humidity
7.3
Specific end use(s)
No data available.
SECTION 8: Exposure controls/personal protection
8.1
Control parameters
No parameters available for monitoring.
8.2
Exposure controls
Appropriate engineering controls
Provide good ventilation.
Provide good ventilation.
Personal protective equipment
Respiratory protection
No special measures required.
No special measures required.
Eye / face protection
Safety glasses recommended
Safety glasses recommended
Hand protection
Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk
of skin contact with the product . Before use, the protective gloves should be tested in any case for its specific work-
station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the
manufacturer
Sufficient protection is given wearing suitable protective gloves checked according to i.e. EN 374, in the event of risk
of skin contact with the product . Before use, the protective gloves should be tested in any case for its specific work-
station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the
manufacturer
’s instructions and information relating to the use, storage, care and replacement of protective gloves.
Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid
permanent use of protective gloves.
Appropriate Material
permanent use of protective gloves.
Appropriate Material
butyl rubber
Appropriate Material
neoprene
Appropriate Material
PVC
Other
Wear suitable protective clothing
Wear suitable protective clothing
Environmental exposure controls
No data available.
No data available.