Omron G2R-2-SNI 24 VAC PCB Mount Relay 24Vac 2 CO, DPDT G2R-2-SNI 24 VAC データシート
製品コード
G2R-2-SNI 24 VAC
464
General Purpose Relay – G2RS
PFP-100N, PFP-50N
4.5
15
25
25
25
25
10
10
1,000 (500)
7.3
±0.15
35
±0.3
27
±0.15
1
15 (5)
It is recommended to use a panel 1.6 to 2.0 mm thick.
PFP-100N2
4.5
15
25
25
25
25 15
10
10
1,000
35
±0.3 27
24
16
29.2
1
1.5
PFP-M
PFP-S
50
11.5
10
6.2
1.8
1
35.5 35.3
1.8
1.3
4.8
5
16
12
44.3
34.8
10
16.5
M4 x 8 pan
head screw
head screw
Mounting Tracks
End Plate
CAUTION
Do not use the test button for any purpose other than
testing. Be sure not to touch the test button accidentally as
this will turn the contacts ON. Before using the test button,
confirm that circuits, the load, and any other
connected item will operate safely.
this will turn the contacts ON. Before using the test button,
confirm that circuits, the load, and any other
connected item will operate safely.
CAUTION
Check that the test button is released before turning
ON relay circuits.
ON relay circuits.
CAUTION
If the test button is pulled out too forcefully, it may
bypass the momentary testing position and go straight into
the locked position.
the locked position.
CAUTION
Use an insulated tool when you operate the test
button.
Precautions
PRECAUTIONS FOR P2RF-
■
-S CONNECTION
• Do not move the screwdriver up, down, or from side to side
while it is inserted in the hole. Doing so may cause damage to
internal components (e.g., deformation of the clamp spring or
cracks in the housing) or cause deterioration of insulation.
internal components (e.g., deformation of the clamp spring or
cracks in the housing) or cause deterioration of insulation.
• Do not insert the screwdriver at an angle. Doing so may break
the side of the socket and result in a short-circuit.
CAT. No. J114-E2-02
Omron A5 Catalogue 2007 419-518 11/9/06 11:04 am Page 464