Zettler Electronics AZ2501P2-1C-12DK PCB Mount Relay 1 CO, SPDT AZ2501P2-1C-12DK データシート

製品コード
AZ2501P2-1C-12DK
ページ / 3
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage
.96 W single coil
(typical)
1.9 W dual coil
Temperature
Max. 105°C (221°F)
UL/CUR 
AZ
5/29/09
GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
6
Electrical
1 x 10
5
at 50 A 250 VAC Res. (SPST)
Set and Reset
Pulse Duration
50 ms minimum
Set Time (typical)
15 ms at nominal coil voltage
Reset Time (typical)
15 ms at nominal coil voltage
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1500 Vrms between open contacts
Insulation
1000 megohms min. at 20°C, 500 VDC,
Resistance
50% RH
Creepage Distance
8 mm
Ambient Temperature
At nominal coil voltage
Operating
-40°C (-40°F) to 70°C (158°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" DA at 10–55 Hz
Shock
Operating
10 g, 11 ms, 
1
/
2
sine (no false operation)
Non-Operating 100 g, 11 ms, 
1
/
2
sine (no damage)
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
32 grams
AZ2501
50 AMP LATCHING 
POWER RELAY
FEATURES
• Low cost
• 50 Amp switching
• Heavy loads to 13850 VA
• 4 kV dielectric
• Manual switch available
• Epoxy sealed version available
• UL, CUR file E44211
CONTACTS
Arrangement
SPST (1 Form A), 1C (SPDT)
Ratings
Resistive load:
Max. switched power: 13850 VA
Max. switched current: 50 A
Max. switched voltage: 440 VAC
1 Form A (SPST)
50 A at 277 VAC, resistive, 100k cycles
5540 W at 277 VAC, Tungsten, 30k cycles
20A at 120 VAC, 277 VAC Ballast
20 FLA, 120 LRA at 120 VAC, 30k cycles
17 FLA, 102 LRA at 240 VAC, 30k cycles
14 FLA, 84 LRA at 277 VAC, 30k cycles
16 A at 120/277 VAC Electronic Balllast 70°C
6A/120 VAC, 3A/240 VAC, 2.6A/277 VAC Pilot Duty
1 Form C (SPDT)
40 A at 277 VAC, General Use, 30k cycles
Material
Silver tin oxide
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)