Phoenix Contact Timer relay ETD-FL-2T-DTI 2866187 2866187 データシート
製品コード
2866187
Nov 9, 2013 2 / 6
Technical data
Coil side
Input voltage range
24 V DC ... 240 V DC -20 % ... +25 %
Input voltage range
24 V AC ... 240 V AC -15 % ... +10 %
Temperature sensitivity
≤ 0.01 %/K
Function
lp: Switched-mode beginning with the pause
Function
li: Switched-mode beginning with the pulse
Function
ER: With switch-on and release delay with control contact
Function
EWu: With switch-on delay and single shot leading edge, voltage
controlled
Function
EWs: With switch-on delay and single shot leading edge with
control contact
Function
WsWa: With single shot leading edge and single shot trailing edge
with control contact
Function
Wt: Pulse sequence evaluation (retriggerable release delay)
Time setting range
50 ms ... 10 h (10 time end ranges)
Recovery time
500 ms
Contact side
Contact type
2 floating PDT contacts
Maximum switching voltage
250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max.
750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
Interrupting rating (ohmic load) max.
1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse
5 A (fast-blow)
General
Status display
Green LED (POWER)
Status display
Yellow LED (relay active)
Mechanical service life
Approx. 2 x 10
7
cycles
Nominal power consumption
2.5 VA (1 W)
Test voltage relay winding/relay contact
4 kV
Mounting position
Any
Assembly instructions
on standard DIN rail NS 35 in accordance with EN 60715
Color
green
Housing insulation material
Polyamide PA, self-extinguishing
Permissible humidity (operation)
15 % ... 85 %
Nominal frequency
48 Hz ... 400 Hz
Rated insulation voltage
300 V (According to EN 50178)
Conformance
CE-compliant
UL, USA / Canada
UL/C-UL listed UL 508
Connection data
Conductor cross section stranded min.
0.5 mm²
Conductor cross section stranded max.
2.5 mm²
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
2.5 mm²