Kenwood Electronics WAV/AAC/WMA/MP3/CD-Receiver with Changer Control KDC-W9537U ユーザーズマニュアル

|

English

•  If you experience problems during installation, 

consult your Kenwood dealer.

•  When you purchase optional accessories, check with 

your Kenwood dealer to make sure that they work 
with your model and in your area.

•  Characters that conform to ISO 8859-1 can be 

displayed.

•  Characters that conform to ISO 8859-5 or ISO 8859-

1 can be displayed. Refer to <Selecting Russian 
Characters> (page 44). (Russian sales area of KDC-
W9537UY)

•  The RDS feature won’t work where the service is not 

supported by any broadcasting station.

•  In this document, the description indicator will light 

means a status is displayed. Refer to <Display Type 
Selection>(page 16) for the details of the status 
display.

•  The illustrations of the display, the function icon and 

the panel appearing in this manual are examples 
used to explain more clearly how the controls are 
used. Therefore, what appears on the display in the 
illustrations may differ from what appears on the 
display on the actual equipment, and some of the 
illustrations on the display may be inapplicable.

•  If the unit fails to operate properly, press the Reset 

button. The unit returns to factory settings when the 
Reset button is pressed. 

•  Remove the USB device before pressing the Reset 

button. Pressing the Reset button with the USB 
device installed can damage the data contained in 
the USB device. For how to remove the USB device, 
refer to <Playing USB (iPod) device> (page 26).

•  Stop recording and copying before pressing the 

reset button. If the reset button is pressed while 
writing to the internal memory such as when 
recording or copying, the data in the internal 
memory may be damaged. Refer to <Recording 
music CD>(page 34) and <Copying from USB 
device>(page 33) for information on canceling 
recording or copying.

•  Press the reset button if the disc auto changer fails 

to operate correctly. Normal operation should be 
restored.

Reset button

If the faceplate of this unit is stained, wipe it with a 
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with 
a cloth moistened with neutral cleaner, then wipe it 
again with a clean soft dry cloth.

¤

•  Applying spray cleaner directly to the unit may affect its 

mechanical parts. Wiping the faceplate with a hard cloth or 
using a volatile liquid such as thinner or alcohol may scratch 
the surface or erases characters.

If the terminals on the unit or faceplate get dirty, wipe 
them with a clean soft dry cloth.

This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the 
<Demonstration mode Setting> (page 46).

•  "Music Editor" is recorded in the CD-ROM attached 

to this unit.

•  Refer to the attached installation manual for the 

installation method of "Music Editor".

•  Refer to the user’s manual recorded in the 

installation CD-ROM and Help of "Music Editor" for 
the operation method of "Music Editor".

•  The unit can play CD/ USB device created by "Music 

Editor".

•  Information about "Music Editor" upgrade is put on 

the site, www.kenwood.com. 

B64-3773-00_00_E_English.indd   4

B64-3773-00_00_E_English.indd   4

07.5.10   5:18:19 PM

07.5.10   5:18:19 PM