Otto Toggle switch 28 Vdc, 125 Vac 16 A 1 x Off/On IP68 latch 25 pc(s) 101294 データシート

製品コード
101294
ページ / 5
R
O
C
K
E
R
S
W
IT
C
H
E
S
SEALED, ILLUMINATED ROCKER SWITCHES
SNAP-IN
ROCKERS
K1/K2
Specifications Subject To Change Without Notice
www.ottoexcellence.com     77
LOW COST, SNAP-IN ROCKER FOR WET AND DUSTY ENVIRONMENTS; 1 AND 2 POLES
The K series rockers are rugged, high performance sealed switches
designed for use under severe conditions found in marine, appliance,
heavy equipment and industrial control applications. They are
designed to meet the international submersion specification level
IP68. An optional panel seal is also available.
The K1 series is offered in single pole configuration while the K2 series
is available in single and double pole configurations. Both series offer
illuminated models. Illumination can be independent or dependent of
the switch position or a combination of both. A choice of red, green,
clear or amber colored lens are offered in illuminated models.
Illumination options include incandescent, LED or neon light sources.
Mounting is simple and quick; snaps into panel from the front. The
OTTO snap-in design supports a variety of panel thicknesses with
just one cut-out size specified.
A choice of models are offered to handle power levels to 16 amperes,
1/2 HP and low level electronic switching applications.
OTTO can provide custom colors upon request. Value-added
assemblies with wire leads are also available. Please consult the
factory for assistance.
Quality Features: 
• Withstands direct water spray
• Submersible. Designed to meet IP68
• Fits industry standard panel openings for drop-in
replacement of panel sealed and unsealed switches
• Snap-in feature accommodates a wide range of 
panel cut-outs
• Switches up to 16 amps
• UV and Solvent resistant
• Withstands extreme shock & vibration
• Custom legends available
• 2- & 3-position, momentary and maintained action
• Incandescent, LED and neon illumination with
independent and dependent light source options
• UL and CSA recognized
K1 Series
Single Pole
K2 Series
Single & Double Pole
®
Standard Characteristics/Ratings:
OPERATIONAL:
Mechanical Life: 
100,000 cycles, minimum
Seal: 
Watertight, submersible to IP68
Temperature Range:
-30°C to +85°C
Button & Case: 
Thermoplastic
Terminals: 
Brass alloy
Contacts: 
Fine Silver/Silver Cad. oxide
ELECTRICAL:
(at 28 VDC or 125 VAC)
LOAD
RATING
LIFE (Min.)
Resistive
16A
25,000 cycles
Resistive
10A
50,000 cycles
Inductive
10A
25,000 cycles
Lamp
5A
25,000 cycles
Motor 1/2HP
25,000 
cycles
Dielectric Withstand: 1050V rms — Except across light terminals