Otto Toggle switch 28 Vdc, 125 Vac 16 A 1 x Off/On IP68 latch 25 pc(s) 101294 データシート
製品コード
101294
R
O
C
K
E
R
S
W
IT
C
H
E
S
SEALED, ILLUMINATED ROCKER SWITCHES
SNAP-IN
ROCKERS
K2
Specifications Subject To Change Without Notice
www.ottoexcellence.com
81
LOW COST, SNAP-IN ROCKER FOR WET AND DUSTY ENVIRONMENTS; 1 AND 2 POLES
Lens Color
Position
Position
“A”
“C”
A. No Lens
A. No Lens
B. Red
B. Red
C. Green
C. Green
D. Amber
D. Amber
E. Clear
E. Clear
Light/Circuit Location
A. No Light
Dependent Light ON
in Position “A”
Wired to Terms 1 & 7
Dependent Light ON
in Position “A”
Wired to Terms 1 & 7
Dependent Light ON
in Position “C”
Wired to Terms 2 & 8
Independent Light ON
in Position “A”
Wired to Terms 7 & 8
Dependent Light ON
in Position “C”
Wired to Terms 2 & 8
Dependent Light ON
in Position “C”
Wired to Terms 2 & 8
Independent Light
at Position “A”
Wired to Terms 7 & 8
Independent Light ON
in Position “A”
Wired to Terms 3 & 7
Independent Light ON
at Position “C”
Wired to Terms 4 & 8
Not available in
Double Throw/
Double Pole
Independent Light
at Position “C”
Wired to Terms 7 & 8
D= Dependent
I = Independent
I = Independent
Dependent Light ON
in Position “A”
Wired to Terminals 1 &
7
Independent Light
at Position “C”
Wired to Terms 7 & 8
Legend and Orientation
A. None
N U M B E R I N G C O D E
X
X
X
X
• LED anode (+) terminal number shown in bold
• Light on OFF side must be independent
• Contact factory for multiple light types in
the same switch
NOTES
• No momentary switches with dependent lights
• No momentary switches with dependent lights
• Neon lamp only to be coded with clear or amber lenses
• LED lenses must be clear or same color as the lens
• No dependent light in OFF positions
• All legends will be White except for actuator code
C, F, J, M & R will be Black
• K2 Connector part number C801765
• Recommended Quick Connect Terminals:
- AMP 60253-2 for 12-16 AWG wire with .160"-.210" insulation OD
- AMP 42100-2 for 14-18 AWG wire with .100"-.170" insulation OD
• K2 Panel Plug part number C100695-2