Otto Toggle switch 125 Vac 20 A 2 x (On)/Off/(On) IP68 momentary/0/momentary 25 pc(s) 104085 データシート

製品コード

104085

SEALED, ILLUMINATED ROCKER SWITCHES

SEALED

ROCKERS

OTTO 2007 Full Line Catalog

Specifications Subject To Change Without Notice

ATTRACTIVE AND RUGGED FOR WET AND DUSTY ENVIRONMENTS

The OTTO K5 series is a quality, precision switch designed

to comply with standards established for appliance, marine (ignition

protection) and off-road vehicles along with other demanding

applications where rugged rocker switches are required.

K5 series sealed rocker switches snap into industry-standard panel

cutouts. Choose illuminated and printed legends, thru-panel drain

option, and switching compatibility from low level to 20 amps.

The K5 series offers a choice of LED, incandescent and neon illumination.

Legends can be stamped onto a non-illuminated button, stamped onto

an illuminated lens, or laser etched into the lens and backlit.

Available in standard and low level contact ratings, the K5

rockers will fit a wide range of applications. Expect a minimum of

25,000 cycles at a full rated load of 20 amps resistive or

15 amps inductive. 100,000 cycles are possible at low level loads. A

full complement of switch operation is available including momentary

and maintained action in 2- or 3-position switches in SPST, SPDT,

SPTT, DPST, and DPDT circuit arrangements.

OTTO can provide custom colors upon request. Value-added

assemblies with wire leads are also available. Please consult the

factory for assistance.

Quality Features:

• Submersible, sealed watertight per IP68

• Snap-in panel mounting into industry standard

panel cutout

• Optional panel seal gasket

• LED, neon and incandescent lighting

• .250" Q.C. terminals

• Optional one-piece connector

• Optional terminal barriers

• Low level to 20 amp switch

• Configurable Single Pole Triple Throw (SPTT) with

external jumpers

Standard Characteristics/Ratings:

OPERATIONAL:

Mechanical Life:

100,000 cycles, minimum

Seal:

Watertight, submersible to IP68 to 1 meter

Operating Temperature Range: -40°C to +85°C

Case:

Thermoplastic.

Button:

Thermoplastic ( with or without)

Mounting:

Snap-In from front into industry standard panel cutout

Contacts:

Silver Alloy. Gold flash for low level

Terminals:

Brass 1/4" Q.C. Standard

Light Source:

6V, 12V, 24V Incandescent; 125V, 250V Neon; 2V, 6V, 12V,
24V red, green, amber LED

ELECTRICAL:

LOAD

CURRENT RATING

LIFE

Type

12V & 18V

125VAC

(Min.)

Resistive

20A

16A

25,000 cycles

Inductive

15A

25,000 cycles

Lamp

25,000 cycles

Motor Load:

1/2 HP at 110 VAC

Dielectric Withstand:

1050 Vrms except across light terminal