Solar Trend 01241 プリント
Instruction Manual
Solar Pump Set TURIN Item No. 01241
Distribution by Süd Solar GmbH, Max-Eyth-Str. 6, 71732 Tamm (Germany)
Copyright ©: Süd Solar GmbH, 2012. Subject to modifications.
www.sued-solar.de
Copyright ©: Süd Solar GmbH, 2012. Subject to modifications.
www.sued-solar.de
REV-2-19-12-12
1. Introduction
Dear customer. Thank you for purchasing one of our products.
This product is manufactured to European directives and National regulations.
Relevant declarations and documents are deposited at the manufacturer to prove conformity.
This product is manufactured to European directives and National regulations.
Relevant declarations and documents are deposited at the manufacturer to prove conformity.
2. Warranty Advices
The guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any attempt at adjustment or repair other than that of approved
agents. This guarantee does not affect your statutory rights. Maintenance should only to be carried out by a qualified person. This
product is not a toy and is inappropriate for children.
neglect, tampering with the equipment, or any attempt at adjustment or repair other than that of approved
agents. This guarantee does not affect your statutory rights. Maintenance should only to be carried out by a qualified person. This
product is not a toy and is inappropriate for children.
3. Appropriate Use
The Solar Pump Set is only for outdoor use.
For operation it is necessary that the solar module is in direct sunlight.
For operation it is necessary that the solar module is in direct sunlight.
4. Commissioning
1. Carefully remove all parts out of the packaging.
2. Depending on which fountain you prefer you can select a suitable nozzle from the sprinkler kit (included in delivery),
2. Depending on which fountain you prefer you can select a suitable nozzle from the sprinkler kit (included in delivery),
assemble and attach it to the water outlet of the pump.
You may also consider connecting a suitable hose (not included in delivery) to the water outlet of the pump in order to
supply water features or a small stream.
You may also consider connecting a suitable hose (not included in delivery) to the water outlet of the pump in order to
supply water features or a small stream.
3. Fix the standpipe on the solar pump and completely submerse in a pond or reservoir. The pump must be fully
submersed; if the pump is not completely covered then you should add more water until it is.
4. Fix the angle support to the aluminum frame of the solar module. Add the extension and spike. Position the solar module
in direct sunlight to gain maximum power. Making sure that it is within range of the pump. It is very important that the
solar module is always in bright sunlight and never in the shade as this will influences the efficiency of the pump.
solar module is always in bright sunlight and never in the shade as this will influences the efficiency of the pump.
5. Lay the connector cable of the pump carefully and safely between the panel and pump.
Plug the pump cable into the back of the solar module. The solar pump set is now ready for use.
6. If the sun is shining on the solar module, the pump will start to pump water and create the perfect water feature for your
garden.
5. Care, Maintenance and Malfunction
Only clean the product with a damp cloth, do not use detergents or chemicals. If the pump fails to operate first check that the solar
module is positioned in direct sunlight.
module is positioned in direct sunlight.
To clean the pump, first remove the standpipe from the outlet nozzle, then, open the filter case, turn the pump over so you can see the
underside. Remove the filter basket on the front of the pump (see Picture 1) by pulling it in the direction of the arrow. Remove and
clean the foam filter (see Picture 2) under clean running water.
underside. Remove the filter basket on the front of the pump (see Picture 1) by pulling it in the direction of the arrow. Remove and
clean the foam filter (see Picture 2) under clean running water.
For cleaning the pump impeller, first push the bottom of the pump with its four suction cups in direction of the arrow and remove it from
the motor (see Pictures 3 and 4), clean thoroughly with clean water do not use chemicals or detergents.
Most parts are available as spare parts on demand.
the motor (see Pictures 3 and 4), clean thoroughly with clean water do not use chemicals or detergents.
Most parts are available as spare parts on demand.
Picture 1 Picture 2 Picture 3 Picture 4