Benq LED table lamp 6 W Warm white 9H W31QD WQ1 Black 9H W31QD WQ1 ユーザーズマニュアル

English

1

Thank you for purchasing the Hatha LED (Light-Emitting Diode) lamp. To ensure your safety 

against any potential hazards and to optimize your lighting experience, please read this guide 

carefully before using the lamp, and keep this guide in a safe place for future reference.

Check the packaging for the following items. If any is missing or damaged, please contact the 

place of purchase immediately.

Note: The illustrations in this guide are for your reference only and may look different from the 

appearance of the product you purchased. The type of power plug included varies according to 

your country or region.

This lamp has been tested and certified under strict regulations and standards for illuminating 

devices. To ensure your safety, please pay attention to the warnings and cautions below, and 

follow the instructions in this guide when using the lamp.
• To prevent electric shock, do not disassemble the lamp for any reasons.

• Do not attempt to modify the lamp. Doing so may cause the lamp to malfunction or result in 

irreparable damages.

• Use only the supplied power adapter (ADS-18D-12N 12018G) and connect only to a suitable 

outlet power (100-240V AC, 50/60 Hz). Otherwise the lamp will fail to work normally or 

result in a fire hazard.

• Be aware of the total loading when using extension cords or multiple outlet power boards.

• In order to prevent any damages to the lamp, do not hang or place any objects on the lamp.

• Route the power cord so as to avoid it from being walked on or pinched by items placed upon 

or against it.

• Place the lamp only on a solid, flat and stable surface. Otherwise the lamp may tip over and 

result in damages.

• If the lamp will not be used for a long period of time, unplug it from the power outlet.

• Hatha LED lamp (A) x 1

• Power adapter (B) x 1

• User guide (C) x 1

• Regulatory compliance sheet (D) x 1

In case of the following situations, unplug the lamp from the power outlet 

immediately and contact the authorized service center or a qualified service 

person for inspection or repair:
• When the outer casing of the lamp is broken

• When there are strange odors coming from the lamp

• When the lamp flickers

• When the insulation of the lamp's wiring is damaged or frayed, and the metal 

strings inside can be seen

• When unknown chemical liquids are spilled on the lamp

• Do not use the lamp in a humid environment (like in a bathroom or outdoors). 

Otherwise the components inside may short-circuit and result in accidents.

• This lamp is designed for indoor use only. Do not use it outdoors.

• Never disassemble the lamp or remove any components from it, as doing so 

may result in accidents and will void the product warranty. 

Hatha.book  Page 1  Monday, July 8, 2013  5:18 PM