C&E Kitchen furniture, work lights BL-4W/W flat Silver Built-in LED BL-4W/W flat データシート

The product is intended for illuminating indoor areas; it may be installed and used only in dry, 
enclosed indoor rooms. 
The safety instructions must be observed at all times!
Any use other than that described above could lead to damage to this product and involves the 
risk of short circuits, fi re, electric shock, etc. 
This product complies with the applicable national and European requirements. All names of 
companies and products are the trademarks of the respective owners. All rights reserved.

• Recessed light
•  Installation material (2 holding clips, 2 screws)
• Operating instructions

   This symbol indicates specifi c risks associated with handling, function and use. 

   The “Hand” symbol indicates special tips and operating information.

    The product is intended to be located and used only in dry indoor spaces; it must not 

get damp or wet.

 

Symbol for protection class III

 

The light cannot be dimmed.

 

Observe the operating instructions!

 

•  The unauthorised conversion and/or modifi cation of the product is inadmissible 

because of safety and approval reasons (CE).

 

•  The product is not a toy and does not belong in the hands of children! Install the 

product out of the reach of children.

 

• The product is designed according to protection class III. 

 

•  The light may be operated only via a suitable power pack with a stabilised output 

voltage of 24 V/DC (direct current) which provides a suffi ciently high output cur-
rent.  

 

   When connecting the product, pay attention to the correct polarity (internal con-

tact must have positive/+, external contact negative/-). The round low-voltage plug 
required for the connection must have an external diameter of 3.5 mm and an 
internal diameter of 1.3 mm.

 

   We recommend the power pack with item no. 563196 available as accessory, 

which is specially designed for this light. 

 

•   Due to the special design, multiple lights identical in design and construction (order 

no. 563171 and/or 563172) can be connected in series. The suitable connectors 
are not included in the package of the lights. They must be ordered as accessories 
(see e.g. www.conrad.com).

      Make sure the maximum output power of the power pack used corresponds to at 

least the total output of the lights connected. 

 

   Independent of this, a maximum of 12 lights with the item no. 563171 or a maxi-

mum of 6 lights with the item no. 563172 may be connected in series. 

 

•  The light may be installed and used in dry indoor rooms only; it must not become 

damp or wet.

 

• Use the lamp only when it is permanently mounted.

 

•  Do not use this light in rooms that are under adverse ambient conditions where 

combustible gases, vapours or dust are or may be present! There is a risk of explo-
sion!

 

•  Do not hang or attach objects (e.g. decorative material) to the light; there is a risk 

of fi re!

 

• Caution, LED light: 

 

  Do not look directly into the LED light!

 

  Do not look into the beam directly or with optical instruments! 

 

•  The product must not be exposed to extreme temperatures, strong vibrations or 

heavy mechanical stress.

 

•  If it can be assumed that safe operation is no longer possible, the device must be 

turned off and precautions must be taken to ensure that it is not used unintention-
ally. After this, arrange for an expert to check the product.

 

  Safe operation can no longer be assumed if:

 

-  the product shows visible signs of damage

 

-   the product does not work at all or works poorly (where there is fl ickering light, 

leaking smoke or a smell of burning, audible crackling noises, or discolouration 
of the product or to adjacent surfaces)

 

-  the product was stored under unfavourable conditions

 

-  it was exposed to heavy loads during transport

 

•  Do not leave packaging material carelessly lying around, since it could become a 

dangerous plaything for children.

 

•  In commercial institutions, the accident prevention regulations of the Employer’s 

Liability Insurance Association for Electrical Systems and Operating Facilities are 
to be observed!

 

•   If you have any questions that are not answered in this manual, please contact our 

technical service or another specialist.

  Please consult the chapter “Safety Instructions”!

•   Make sure you install the light only to a solid base, e.g. beneath a kitchen cabinet).
•   The light is intended to be placed and used only in dry indoor rooms; it must not become 

damp or wet.

•  Do not mount the light on easily fl ammable surfaces.
•  The light must be installed and used out of the reach of children.
•   Installation and connection of the LED light may be done only in the absence of any voltage. 

   The light may be operated only via a suitable power pack with a stabilised output 

voltage of 24 V/DC (direct current) that has a suffi ciently high output current.

 

 When connected to other voltage/power supplies, the light will be destroyed, loss of 
warranty!