Gw Instek USG-0103 Function Generator, Frequency Generator USG-0103 データシート
製品コード
USG-0103
OPERATION
37
2. Press Single Sweep and perform a single sweep.
It may take some time to complete a full sweep,
depending on the fixed RBW (1MHz) and span
100MHz settings.
100MHz settings.
The Normalize panel will be selectable after the
first sweep is performed.
3. Press Normalize after a full sweep has been
performed. The Normalize radio button will
then automatically be set to ON.
then automatically be set to ON.
This will normalize the USG output for the
Primary RF software.
4. Set the normalized amplitude level.
Normalize: 0 ~ -30dBm.
Display
Normalized spectrum
USG spectrum