Reely Tuning QuadroCopter Lightboard QC06 209875 209875 データシート





The lightboard has a serial interface like the control board of the QuadroCopter. The electronics
can communicate with a computer via those interfaces.
Using the jumper X11, the serial interface of the lightboard can either communicate with the
control board of the QuadroCopter (2nd internal interface) via the 26-core interface cable or be
switched to the interface connection X12. This function is used for future expansions and is
currently without function.
When the contacts 1 and 2 are connected with a jumper, the interface at the control board of the
QuadroCopter is active. When the contacts 2 and 3 are connected with a jumper, the interface at
the lightboard (X12) is active.
For the pin assignment, see figure 11.

If the computer interface in the computer does not have sufficient power supply for
the electronics in the QuadroCopter, the drive battery must be connected to the
QuadroCopter.

1

2

3