Futaba 10J F4109 データシート
![Futaba](https://files.manualsbrain.com/attachments/367e0870790dec0ba2a7dbfdd4e785826c63df7f/common/fit/150/50/751f7f6b034746864b1f4d9fd84c85c456106e1dcab8ca6d5821762ccd13/brand_logo.gif)
製品コード
F4109
131
Helicopter
Function
Method
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
+
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
(1 second)
Calling the setting screen
This mixing adjusts the gyro sensitivity from the
transmitter. The AVCS gyro (GY mode) or normal
gyro (STD mode) can be selected. Up to 3 axes can
be set.
●The sensitivity can be linked to the condition (Cond)
or an arbitrary switch and set.
●When the GY mode was selected, "AVC" or "NOR"
is displayed at the sensitivity setting value.
●The sensitivity setting channel can be selected
from the RUD (CH5), RUD/AIL(CH5/CH7), RUD/
ELE (CH5/CH8) or RUD/AIL/ELE (CH5/CH7/CH8)
combinations.
"GYRO SENS"
(For helicopters Gyro mixing)
GYRO SENS
Gyro mixing
(HELICOPTER)
■ Activating the function
+
-
or
① Select the "MIX" item
and then select the
"ON" by pressing the +
key or – key.
● When you do not use a function, set to the
"INH" side.
■ Gain switch selection
+
-
or
② Select the "SW" item
and then select the
switch by pressing the
+ key or – key.
Range:Cond, SwA ~ SwH
■ Gain channel selection
+
-
or
③ S e l e c t t h e
"CH" item and
t h e n s e l e c t
the sensitivity
setting channel by pressing the + key
or – key.
Range:RUD, RUD/AIL,
RUD/ELE, RUD/AIL/ELE
Default:RUD
■ Gyro type and sensitivity setting
④ Press the Jog key and select the sensitivity setting
screen you want to set and then set "type" (gyro
type) and "rate" (gyro sensitivity) of each channel by
pressing the +key or – key.
("type")Range:STD,GY Default:STD
("rate")Range:0 ~ 100%(STD), NOR100 ~ 0 ~
("rate")Range:0 ~ 100%(STD), NOR100 ~ 0 ~
AVC100%(GY) Default:50%(STD), 0%(GY)
● When you want to return the set value to the initial
value, press the + key and – key simultaneously.
Gyro setup
Activating the function
Gain channel selection
Switch direction
Gyro type,
Gain rate
● When not using this function,
select INH.
Gain switch direction
(Present switch position)
(Present switch position)
● Switches to the
sensitivity setting
screen of each
switch direction
when the Jog key is pressed.
● Select the setting item
with the Jog key.
(Gyro type) (Gyro Gain set)
● When a Futaba GY gyro is used, gyro type "GY" is selected. This switches the gyro sensitivity
setting item to the mode and sensitivity direct reading display.
GYRO SENS