Futaba 10J F4109 データシート
製品コード
F4109
170
Multicopter
Function
Method
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
+
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
(1 second)
Calling the setting screen
■ Activating the function
+
-
or
① Select the "MIX" item
and then select the
"ON" by pressing the +
key or – key.
● When you do not use a function, set to the
"INH" side.
■ Sensitivity switch selection
② Select the "SW" item and then select the
switch by pressing the + key or – key.
Range:SwA ~ SwH、Default:SwA
■ Sensitivity setting channel selection
+
-
or
③ S e l e c t t h e
"CH" item and
t h e n s e l e c t
the sensitivity
setting channel by pressing the + key
or – key.
Range:CH5、CH5/CH7、
CH5/CH8、CH5/CH7/CH8
Default:CH5
■ Gyro type and sensitivity setting
④ Press the Jog key and select the sensitivity setting
screen you want to set and then set “type” (gyro type)
and “rate” (gyro sensitivity) of each channel by pressing
the +key or – key.
("type")Range:STD,GY Default:STD
("rate")Range:0 ~ 100%(STD), NOR100 ~ 0 ~
("rate")Range:0 ~ 100%(STD), NOR100 ~ 0 ~
AVC100%(GY) Default:50%(STD), 0%(GY)
● When you want to return the set value to the initial
value, press the + key and – key simultaneously.
GYRO SENS
+
-
or
This function is dedicated mixing for switching
the gyro sensitivity and gyro mode (AVCS/
NORMAL) of Futaba gyros. Up to 3 axes can be
set. The attitude control of multicopter uses the
system of multicopter attachment.
This "GYROSENS" will be used for accessories,
such as camera control.
●The sensitivity switch can be selected and the
sensitivity of each direction of the switch can be
set. (Switches A to H)
●CH5, CH5/CH7, CH5/CH8 or CH5/CH7/CH8
combinations can be selected as the sensitivity
setting channel.
*When this function is used, it becomes impossible for
CH5 to use it for multi copter controller.
Use CH6 for multi copter controller and use SwC.
"GYRO SENS"
GYRO SENS
Gyro sensor
(MULTICOPT)
Activating the function
Gain Channel selection
Switch direction
Gyrotype,
Gain rate
● When not using this function,
select INH.
Gain switch selection
(Current switch operating
direction)
● S w i t c h e s t o t h e
sensitivity setting
screen of each switch
direction when the
Jog key is pressed.
● Select the setting item
with the Jog key.
(Gyro type)
(Gyro Gain)
● When using a Futaba GYA gyro, select gyro type GY. This switches the gyro sensitivity setting
item to mode and sensitivity direct reading display.
GYRO SENS