Futaba 10J F4109 データシート

①  Call  the  menu  screen  from  the 

home screen by pressing the + key 

for 1 second.

＋

② Select 

    from the menu with the Jog 

key.

③  Open  the  setting  screen  by 

pressing the Jog key.

（1 second）

①  Call the "RESET" from the PARAMETER by Press 

the Jog key for 1 second.

                                   （1 second）

● Confirmation message "sure?" blinks.

②  Date reset by pressing the Jog key.

● A  confirmation  "beep"  sounds  and 

"COMPLETE" is displayed on the screen is 

complete.

For safety, a double setting system is used. You need to confirm your setting changes by pressing the 

jog key. When "COMPLETE" can be seen, it is the completion of reset. 

Only the throttle channel (CH3) initial setting is REV (reverse). Thoroughly check the Hi and Low directions 

of the engine or motor used and be careful that they do not suddenly run at full speed.　Even after data reset, 

CH3 is reversed.　

● Next page  2 〜 5

(In the case of a helicopter )
(In the case of a glider )