DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC データシート

©

 2014 DJI. All Rights Reserved. 

Remote Controllers

INSPIRE 1

  User Manual

2.  Lower: The landing gear will lower to its lowest position for landing. 

Connecting Mobile Device

Tilt the Mobile Device Holder to the desired position. Press the button on the side of the Mobile Device Holder 

to release the clamp, and then place your mobile device into the clamp. Adjust the clamp to secure your 

mobile device. Then connect your mobile device to the remote controller with a USB cable. Plug one end of 

the cable into your mobile device, and the other end into the USB port on the back of the remote controller. 

Do not raise the landing gear when the aircraft is on the ground. Ensure the landing gear is 

lowered before landing.

RTH button 

Press and hold this button to start the Return to Home (RTH) procedure. The LED around the RTH Button 

will blink white to indicate the aircraft is entering RTH mode. The aircraft will then return to the last recorded 

Home Point. Press this button again to cancel the RTH procedure and regain the control of the aircraft.