Albrecht GHS01 Guide Headset 29907 29907 データシート
製品コード
29907
User Instructions
Tour Guide Headset GHS 01 Order Nr. 29907
The tour guide headset is an accessory item exclusively designed for
announcements to tourist group members. It can only be used in connection
with ATT 100 Tour Guide transceiver and not with any other radio model.
A) For communication with other tour Guides or for simple Announcements to others
the internal microphone of the ATT 100 can be used and the headset must remain
unplugged. Press Transmit button (PTT) of the radio, talk into microphone (up to 20..30 cm
distance is ok) und release button after announcement.
It is not necessary and not allowed to keep the transmit button longer pressed than
necessary. This saves battery energy and keeps the channel free when not used! During
transmit mode the LED will be red.
B) Announcements to Tourist Group Members via Headset
With Tour Guide headset inserted you can either talk to your tourist group or you can
transmit a prepared and recorded announcement from any MP 3 player to the tourists. Plug
the 4 pole plug into the yellow marked Mic socket besides the antenna. Press PTT button at
headset control unit to transmit. Only where necessary and justified, you can also transmit
longer time continuously by switching the small slide switch at the headset controller from
PTT to PTX (Permanent Transmit). Do not forget to release PTT button or to switch slide
switch back to PTT after finishing the announcement.
the internal microphone of the ATT 100 can be used and the headset must remain
unplugged. Press Transmit button (PTT) of the radio, talk into microphone (up to 20..30 cm
distance is ok) und release button after announcement.
It is not necessary and not allowed to keep the transmit button longer pressed than
necessary. This saves battery energy and keeps the channel free when not used! During
transmit mode the LED will be red.
B) Announcements to Tourist Group Members via Headset
With Tour Guide headset inserted you can either talk to your tourist group or you can
transmit a prepared and recorded announcement from any MP 3 player to the tourists. Plug
the 4 pole plug into the yellow marked Mic socket besides the antenna. Press PTT button at
headset control unit to transmit. Only where necessary and justified, you can also transmit
longer time continuously by switching the small slide switch at the headset controller from
PTT to PTX (Permanent Transmit). Do not forget to release PTT button or to switch slide
switch back to PTT after finishing the announcement.
C) Transmission of pre-recorded Tourist Information to the Group Members
Use the 3 pole plug for the MP 3 player. You can listen the recorded information via your
headset. To transmit these information, just press PTT button (or use PTX slide switch).
Simply adjust the MP 3 volume at your player to obtain a convenient volume at your own
headset. (We recommend to test for best volume before use). You can also speak at the
same time via your microphone to the tourist group! The sound is automatically mixed.
Use the 3 pole plug for the MP 3 player. You can listen the recorded information via your
headset. To transmit these information, just press PTT button (or use PTX slide switch).
Simply adjust the MP 3 volume at your player to obtain a convenient volume at your own
headset. (We recommend to test for best volume before use). You can also speak at the
same time via your microphone to the tourist group! The sound is automatically mixed.
Conformity to European Standards and Directives
Alan Electronics declares the conformity with European
Directives and harmonized technical standards EN 300 296 V
1.3.1, EN 301 489-1 V 1.8.1, EN 301 489-3 V.1.3.1 und EN
60 950-1: 2006 Ed 2 for PMR 446 radio communication as a
part of the radio model Albrecht ATT 100.
Directives and harmonized technical standards EN 300 296 V
1.3.1, EN 301 489-1 V 1.8.1, EN 301 489-3 V.1.3.1 und EN
60 950-1: 2006 Ed 2 for PMR 446 radio communication as a
part of the radio model Albrecht ATT 100.
The radio carries the CE mark and may be used with the headset in all EU member states
and other states where the R&TTE regulations are applied (incl. IS, N, CH, FL) and TR .
Headsets which are defective or not used any more must be recycled properly according to
European rules, not any more via household trash, but only via public recycling stations.
All original documents are provided for download any time from
http://service.alan-electronics.de
http://service.alan-electronics.de
© 2012
Alan Electronics GmbH