Albrecht Tectalk Pro N/A PMR Radio 29784 ユーザーズマニュアル

19

4. Press the PTT button of the master radio while the slave radio 

LED is green. The LED of the slave radio will go off. The master 
radio and slave radio will emit a confirmation beep.

5. If the clone fails the slave radio sends an error beep and the LED 

remains green. Repeat step 4 until a confirmation beep is heard.
If repeated clone attempts fail, repeat the whole procedure 
from step 1.

If  the  clone  procedure  was  successful  switch  off  both  radios  and 
disconnect  the  cloning  cable.  Switch  on  the  slave  radio  to  use  the 
copied data.

This function allows you to adjust the squelch level of your radio.

To change the squelch level, press the Squelch/Mon button briefly. 
The current squelch setting will flash. Use the UP or DOWN button 
to change the setting. Press the PTT button or wait for 5 seconds to 
store your choice.

There  are  15  squelch  levels.  Level  1  is  the  most  sensitive  (open) 
and  level  15  is  the  least  sensitive  (closed).  Auto  is  the  optimum 
factory setting and 'Off' is fully open, with constant static noise.

The  Monitor  function  is  used  to  briefly  check  for  activity  on  the 
current channel, regardless of privacy code settings. It is the same 
as setting the squelch level to 'Off'.