Infocus LP120 COACH DLP-PROJECTOR LP120-COACH ユーザーズマニュアル
製品コード
LP120-COACH
27
Using the menus
To open the menus, press the Menu button on the keypad. (The menus auto-
matically close after 60 seconds if no buttons are pressed.) The Main menu
appears. Use the arrow buttons to move up and down to highlight the
desired submenu, then press the Select button.
matically close after 60 seconds if no buttons are pressed.) The Main menu
appears. Use the arrow buttons to move up and down to highlight the
desired submenu, then press the Select button.
To change a menu setting, highlight it, press Select, then use the up and
down arrow buttons to adjust the value, select an option using radio but-
tons, or turn the feature on or off using check boxes. Press Select to confirm
your changes. Use the arrows to navigate to another setting. When your
adjustments are complete, navigate to Previous, then press Select to go to
the previous menu; select Exit or press the Menu button at any time to close
the menus.
down arrow buttons to adjust the value, select an option using radio but-
tons, or turn the feature on or off using check boxes. Press Select to confirm
your changes. Use the arrows to navigate to another setting. When your
adjustments are complete, navigate to Previous, then press Select to go to
the previous menu; select Exit or press the Menu button at any time to close
the menus.
Dots appear before the menu name. The number of dots indicate the menu’s
level, ranging from one (the Main menu) to four (the most nested menus).
level, ranging from one (the Main menu) to four (the most nested menus).
The menus are grouped by usage:
•
The Picture menu provides image adjustments.
•
The Settings menu provides set-up type adjustments that are not
changed often.
changed often.
•
The About menu provides a read-only display of information about the
projector and source.
projector and source.
Certain menu items may be hidden until a particular source is connected.
For example, Sharpness is only available for video sources and will be hid-
den when a computer source is active. Other menu items may be grayed out
when they are not available. For example, Brightness is grayed out until an
image is active.
For example, Sharpness is only available for video sources and will be hid-
den when a computer source is active. Other menu items may be grayed out
when they are not available. For example, Brightness is grayed out until an
image is active.
Keypad navigation
buttons
buttons
Main menu
Menu
button
button
Dot
Picture
menu
menu
Settings
menu
menu
Dots
About menu