Cep Terminals GSM/GPRS TERMINAL CT63 JAVA 6203 ユーザーズマニュアル
製品コード
6203
Java User’s Guide
7 File Transfer to Module
44
wm_java_usersguide_v19
Page 43 of 109
2012-01-27
Confidential / Released
7
File Transfer to Module
7.1
Module Exchange Suite
The Module Exchange Suite allows you to view the Flash file system on the module as a direc-
tory from Windows Explorer. Make sure that the module is turned on and that one of the mod-
ule’s serial interfaces (ASC0, ASC1 or USB) is connected to the COM port that the Module
Exchange Suite is configured to. The configured COM port can be checked or changed under
Properties of the Module directory. Please note that the Module Exchange Suite can be used
only if the module is in normal mode and the baud rate is configured to a fixed value of 921600,
460800, 230400, 115200, 57600, 38400 or 19200. Please also note that the use of the Module
Exchange Suite resets the module’s AT command settings to their factory defaults (just as the
command AT&F would). Possible user defined profiles stored non-volatile with AT&W will have
to be restored with ATZ after usage.
tory from Windows Explorer. Make sure that the module is turned on and that one of the mod-
ule’s serial interfaces (ASC0, ASC1 or USB) is connected to the COM port that the Module
Exchange Suite is configured to. The configured COM port can be checked or changed under
Properties of the Module directory. Please note that the Module Exchange Suite can be used
only if the module is in normal mode and the baud rate is configured to a fixed value of 921600,
460800, 230400, 115200, 57600, 38400 or 19200. Please also note that the use of the Module
Exchange Suite resets the module’s AT command settings to their factory defaults (just as the
command AT&F would). Possible user defined profiles stored non-volatile with AT&W will have
to be restored with ATZ after usage.
While running the module with the Module Exchange Suite, subdirectories and files can be add-
ed to the flash file system of module. Keep in mind that a maximum of 200 flash objects (files
and subdirectories) per directory in the flash file system of the module is recommended.
ed to the flash file system of module. Keep in mind that a maximum of 200 flash objects (files
and subdirectories) per directory in the flash file system of the module is recommended.
7.1.1
Windows Based
The directory is called “Module” and can be found at the top level of workspace “MyComputer”.
To transfer a file to the module, simply copy the file from the source directory to the target di-
rectory in the “Module
To transfer a file to the module, simply copy the file from the source directory to the target di-
rectory in the “Module
Module Disk (A:)”.
7.1.2
Command Line Based
A suite of command line tools is available for accessing the module’s Flash file system. They
are installed under Module Exchange Suite installation directory so that the tools are available
from any directory. The module’s file system is accessed with mod:. The tools included in this
suite are MESdel, MEScopy, MESxcopy, MESdir, MESmkdir, MESrmdir, MESport, MESclose
and MESformat. Entering one of these commands without arguments will describe the com-
mand’s usage. The tools mimic the standard directory and file commands. A path inside the
module’s file system is identified by using “mod:” followed by the module disk which is always
“A:” (e.g. “MESdir mod:a:” lists the contents of the module’s root directory).
are installed under Module Exchange Suite installation directory so that the tools are available
from any directory. The module’s file system is accessed with mod:. The tools included in this
suite are MESdel, MEScopy, MESxcopy, MESdir, MESmkdir, MESrmdir, MESport, MESclose
and MESformat. Entering one of these commands without arguments will describe the com-
mand’s usage. The tools mimic the standard directory and file commands. A path inside the
module’s file system is identified by using “mod:” followed by the module disk which is always
“A:” (e.g. “MESdir mod:a:” lists the contents of the module’s root directory).
7.2
Over the Air Provisioning
See
for OTA provisioning.