Microchip Technology XC8 Standard Compiler (Workstation) SW006021-1 SW006021-1 ユーザーズマニュアル
製品コード
SW006021-1
XC8 Command-line Driver
2012 Microchip Technology Inc.
DS52053B-page 129
4.10.3.3
ADDITIONAL
These options, shown in Figure 4-15 relate to miscellaneous options.
1.
Fill: This field allows a fill value to be specified for unused memory locations, see
Section 4.8.30 “--FILL: Fill Unused Program Memory”.
Section 4.8.30 “--FILL: Fill Unused Program Memory”.
2.
Serial: This option allows you to specify a string which can be inserted into your
output HEX file. See Section 4.8.52 “--SERIAL: Store a Value At This Pro-
gram Memory Address”.
output HEX file. See Section 4.8.52 “--SERIAL: Store a Value At This Pro-
gram Memory Address”.
3.
Codeoffset: This field allows an offset for the program to be specified, see
Section 4.8.22 “--CODEOFFSET: Offset Program Code to Address”.
Section 4.8.22 “--CODEOFFSET: Offset Program Code to Address”.
4.
Checksum: This field allows the checksum specification to be specified, see
Section 4.8.19 “--CHECKSUM: Calculate a Checksum”.
Section 4.8.19 “--CHECKSUM: Calculate a Checksum”.
5.
Errata: This allows customization of the errata workarounds applied by the
compiler, see Section 4.8.27 “--ERRATA: Specify Errata Workarounds”.
compiler, see Section 4.8.27 “--ERRATA: Specify Errata Workarounds”.
6.
Trace type: Not yet implemented. Only native trace supported.
Extend address 0 in HEX file: This option specifies that the intel HEX file should have
initialization to zero of the upper address, see Section 4.8.44 “--OUTPUT= type:
Specify Output File Type”.
initialization to zero of the upper address, see Section 4.8.44 “--OUTPUT= type:
Specify Output File Type”.