Cypress Semiconductor CY3280-MBR3 ユーザーズマニュアル
CY3280-MBR3 Evaluation Kit User Guide, Doc. #: 001-89905 Rev. *B
27
Kit Operation
11. The LEDs can also be renamed, as shown in
Figure 3-17. Rename LEDs
12.Generate the configuration file by clicking the Generate Configuration File icon
on the tool
bar or by pressing [Ctrl] + [G]. The status of configuration file generation is shown in the status
bar at the bottom of the EZ-Click window (see
bar at the bottom of the EZ-Click window (see
).
Figure 3-18. EZ-Click Status Bar Showing Configuration Generation Status
13.Click the Apply Current Configuration icon
on the tool bar in the EZ-Click 2.0 customizer tool
or press [Ctrl] + [L] to download the generated configuration to the MBR3 device.
14.Wait for the message “Device configuration completed successfully” to be displayed on the status
bar, as illustrated in
.
Figure 3-19. EZ-Click Status Bar Showing Successful Device Configuration
15.Touch the buttons on the kit to observe the features as enabled in the configuration.
Note: The Water Tolerance configuration file is preloaded into the kit. The kit supports the features
mentioned in
mentioned in
by default. To learn more about the configurations, see