Cypress Semiconductor CY3280-MBR3 ユーザーズマニュアル

CY3280-MBR3 Evaluation Kit User Guide, Doc. #: 001-89905 Rev. *B

62

Configuration Files and Example Projects

In this section, you learn how to use the CY3280-MBR3 EVK as an Arduino shield with boards com-
patible with the Arduino UNO form factor. The example projects in this section use the 

 as the baseboard. You can mount the CY3280-MBR3 EVK directly on top of the

PSoC 4 Pioneer Kit, as displayed in 

. 

The kit can be used with other Arduino boards in a similar fashion. To begin, configure your kit for
communication with the embedded host. On the CY3280-MBR3 EVK:

■

Change the jumper position on header J13 to connect pins J13-2 and J13-3.

■

Change the jumper position on header J14 to connect pins J14-2 and J14-3.

■

Change the jumper position of J15 to position A; see 

Connect the two kits such that the USB ports of both kits align with each other. When the USB ports
are aligned, the J1, J2, J3, and J4 headers on the PSoC 4 Pioneer Kit connect to J1, J2, J3, and J4
headers on the CY3280-MBR3 EVK.

Note: The J2 header on the PSoC 4 Pioneer Kit is a dual-row header and has three extra pins for
which there are no corresponding pins on the CY3280-MBR3 EVK.

Figure 5-20.  Final Mounted Kit