Texas Instruments INA216 Evaluation Module INA216EVM INA216EVM データシート
製品コード
INA216EVM
INA216EVM Circuit
3.2
R2
R2 is intended to handle two- and four-terminal radial packages (as
illustrates) as well as
surface-mount packages that range in size from 0603 to 1206.
Figure 8. Radial Package in R2
3.3
R3, R4, C1
R3 and R4 are factory-installed 0Ω resistors. These resistors, in combination with C1, form an input filter.
These locations allow for through-hole and surface-mount packages that range in size from 0603 to 1206.
Additional information regarding the use of input filtering is provided in the
3.4
Bypass Capacitors and Jumpers
C2 is a 0.1μF supply bypass capacitor.
J1 is intended to be used as measurements points of R1, if necessary.
J2 is used as a test port at the factory but can be used for the corresponding input and output pins, if
J1 is intended to be used as measurements points of R1, if necessary.
J2 is used as a test port at the factory but can be used for the corresponding input and output pins, if
desired.
8
INA216EVM
SBOU086–August 2011
Copyright © 2011, Texas Instruments Incorporated