Microchip Technology MCP2200EV-VCP ユーザーズマニュアル
MCP2200 USB TO RS-232
DEMO BOARD USER’S GUIDE
2010 Microchip Technology Inc.
DS51901A-page 9
Chapter 1. Product Overview
1.1
INTRODUCTION
This chapter provides an overview of the MCP2200 USB to RS-232 Demo Board and
covers the following topics:
• What is the MCP2200 USB to RS-232 Demo Board?
• MCP2200 USB to RS-232 Demo Board Kit Contents
covers the following topics:
• What is the MCP2200 USB to RS-232 Demo Board?
• MCP2200 USB to RS-232 Demo Board Kit Contents
1.2
WHAT IS THE MCP2200 USB TO RS-232 DEMO BOARD?
The MCP2200EV-VCP is a USB to RS-232 development and evaluation board for the
MCP2200 device. The board is powered from USB. Each I/O has an associated test
point. In addition, two I/Os are connected to LEDs which are used to indicate USB to
UART traffic when the associated pins are configured as TxLED and RxLED pins,
respectively.
The accompanying PC software is used to evaluate/demonstrate the MCP2200 as a
Virtual Com Port (VCP) device. The software also allows I/O control and custom device
configuration.
A DLL is included to allow development of custom configuration and I/O control
software.
MCP2200 device. The board is powered from USB. Each I/O has an associated test
point. In addition, two I/Os are connected to LEDs which are used to indicate USB to
UART traffic when the associated pins are configured as TxLED and RxLED pins,
respectively.
The accompanying PC software is used to evaluate/demonstrate the MCP2200 as a
Virtual Com Port (VCP) device. The software also allows I/O control and custom device
configuration.
A DLL is included to allow development of custom configuration and I/O control
software.
1.3
MCP2200 USB TO RS-232 DEMO BOARD KIT CONTENTS
This MCP2200 USB to RS-232 Demo Board Kit includes:
• One MCP2200 USB to RS-232 Demo Board
• Configuration and control PC software (available on the board web page)
• PC software for configuration and I/O control (available on the board web page)
• A simple DLL for developing custom software (available on the board web page)
• One MCP2200 USB to RS-232 Demo Board
• Configuration and control PC software (available on the board web page)
• PC software for configuration and I/O control (available on the board web page)
• A simple DLL for developing custom software (available on the board web page)