Microchip Technology DM240012 データシート
dsPIC33E/PIC24E USB Starter Kit User’s Guide
DS51936B-page 12
© 2010-2011 Microchip Technology Inc.
1.2
STARTER KIT FUNCTIONALITY AND FEATURES
This section describes the top and bottom board layout assembly of the dsPIC33E or
PIC24E USB Starter Kit.
PIC24E USB Starter Kit.
1.2.1
Top Assembly
The top assembly of the board includes these key features, as indicated in
:
1. dsPIC33EP512MU810 16-bit DSC device (dsPIC33E USB Starter Kit) or
PIC24EP512GU810 16-bit MCU (PIC24E USB Starter Kit).
2. Green power indicator LED (D4).
3. 8 MHz crystal (Y3) for precision microcontroller clocking.
4. USB connectivity for on-board debugger communications (J2).
5. Three push button switches (SW1, SW2, SW3) for user-defined inputs.
6. Three user-defined indicator LEDs (LED1, LED2, LED3).
7. USB Type A receptacle (J6) connectivity for dsPIC33E/PIC24E USB host-based
3. 8 MHz crystal (Y3) for precision microcontroller clocking.
4. USB connectivity for on-board debugger communications (J2).
5. Three push button switches (SW1, SW2, SW3) for user-defined inputs.
6. Three user-defined indicator LEDs (LED1, LED2, LED3).
7. USB Type A receptacle (J6) connectivity for dsPIC33E/PIC24E USB host-based
applications.
8. HOST mode power jumper (J5).
9. Regulated +3.3V power supply for powering the starter kit via USB or an
9. Regulated +3.3V power supply for powering the starter kit via USB or an
expansion board.
FIGURE 1-1:
STARTER KIT LAYOUT (TOP SIDE)
Note: When running USB device applications, open the jumper J5 to prevent
possibly back-feeding voltage onto the V
BUS
from one port on the host to
another (or from one host to another).
1
2
3
4
5
5
5
6
6
6
7
8
9