Keithley KPCI-488LPA データシート
Keithley Instruments, Inc.
28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY
www.keithley.com
Specifications are subject to change without notice.
SPEC-KPCI-488LPA Rev. A / December 2008
Page 1 of 1
Model KPCI-488LPA
GPIB Controller Interface Card Specifications
BASIC SPECIFICATIONS
GPIB Bus Specifications:
GPIB Bus Specifications:
• Up to 14 instruments connected
• Maximal 1.5MB/s data transfer rate
• Cable length:
• Maximal 1.5MB/s data transfer rate
• Cable length:
1. Two meters between each instrument (suggested)
2. Twenty meters total cable length
2. Twenty meters total cable length
• Data transfer mode: 8 bits parallel
• Handshake: 3-wire handshake; reception of each data byte is acknowledged
• Handshake: 3-wire handshake; reception of each data byte is acknowledged
Compliance:
• EMC/EMI: CE, FCC Class A
Operating System:
• Microsoft
®
Windows
®
XP/2000/Vista
General Specifications:
• I/O connector: IEEE 488 standard 24-pin
• Operating temperature: 0°C to 55°C
• Storage temperature: -20°C to 80°C
• Relative humidity: 5% to 95%, non-condensing
• Power consumption @ +5.0V: 250mA (typical), 300mA (maximum)
• Dimensions: 120 mm x 64.5 mm (not including connectors)
• Operating temperature: 0°C to 55°C
• Storage temperature: -20°C to 80°C
• Relative humidity: 5% to 95%, non-condensing
• Power consumption @ +5.0V: 250mA (typical), 300mA (maximum)
• Dimensions: 120 mm x 64.5 mm (not including connectors)