Intel AUGSBURG S775 I915G 10PK KD915GAGLPAK10 ユーザーズマニュアル

Table 45 lists the BIOS Setup program menu features. 

Clears 
passwords and 
displays 
processor 
information  

Displays 
processor 
and memory 
configuration 

Configures 
advanced 
features 
available 
through the 
chipset 

Sets 
passwords 
and security 
features 

Configures 
power 
management 
features and 
power supply 
controls 

Selects boot 
options 

Saves or 
discards 
changes to 
Setup 
program 
options 

Table 46 lists the function keys available for menu screens. 

 

<

←> or <→> 

Selects a different menu screen (Moves the cursor left or right) 

<

↑> or <↓> 

Selects an item (Moves the cursor up or down) 

<Tab> 

Selects a field (Not implemented) 

<Enter> 

Executes command or selects the submenu 

<F9> 

Load the default configuration values for the current menu 

<F10> 

Save the current values and exits the BIOS Setup program 

<Esc> 

Exits the menu 

The Firmware Hub (FWH) includes a 4 Mbit (512 KB) symmetrical flash memory device. 

The BIOS can automatically configure PCI devices.  PCI devices may be onboard or add-in cards.  
Autoconfiguration lets a user insert or remove PCI cards without having to configure the system.  
When a user turns on the system after adding a PCI card, the BIOS automatically configures 
interrupts, the I/O space, and other system resources.  Any interrupts set to Available in Setup are 
considered to be available for use by the add-in card. 

If you select Auto in the BIOS Setup program, the BIOS automatically sets up the 
PCI IDE connector with independent I/O channel support.  The IDE interface supports hard drives 
up to ATA-66/100 and recognizes any ATAPI compliant devices, including CD-ROM drives, tape 
drives, and Ultra DMA drives.  The BIOS determines the capabilities of each drive and configures 
them to optimize capacity and performance.  To take advantage of the high capacities typically 
available today, hard drives are automatically configured for Logical Block Addressing (LBA) and 

90