Nortel Business Communications Manager 200, 16 User/10 Agent NTE803AC ユーザーズマニュアル

3

Data networking components

• For Dial Backup or Remote Admin
• V.92 56 kbps ITU standard
• V.34 33.6 kbps ITU standard
• RJ-11 connector
• V.42/MNP 2-4 error control
• V.42/MNP 5 data compression
• Capable of receiving data at 56 kbps and sending data at 31.2 kbps

• 10/100BASE-T Ethernet ports (on board the mainboard)
• Supports IEEE 802.3 Ethernet frame format
• Uses Carrier Sense Multiple Access with Collision Detection

(CSMA/CD)

• 100BASE-TX with RJ-45 connector
• 10/100 Auto-sensing
• Full-duplex support
• PPPoE (enabled using keycode)

WAN interface

• Each port can be independently configured to Frame Relay or PPP
• STAC compression support
• One serial sync port (V.35) and one T1 port with integrated CSU and

DSU connectivity — N.A. only

• Two serial ports (V.35)
• Two serial ports (V.35 and X.21) – EMEA only 
• Frame Relay or PPP Fragmentation
• RTP Header Compression

• Up to 16 ISDN B-channels
• (PRI or BRI) (optional)
• Dial on demand, Persistent or WAN Backup
• MLPPP

Expansion Cabinet (BCM400 and BCM1000 only)

Connections

• Six Media Bay Module slots
• An 8-pin modular DS256 connector for the interface to the Business

Communications Manager base unit (5 meter cable)

Standard Expansion Cabinet

Depth

18.3 in.; 46.5 cm

Width

17.5 in.; 44.5 cm

Height

5.4 in.; 13.6 cm

Expansion Cabinet with no Media Bay Modules 24.75 lb.; 11.25 kg
Expansion Cabinet with six Media Bay Modules 39 lb.; 17.75 kg

Redundant Expansion Cabinet (redundant power supply and fans)

Depth 

20 in.; 53.8 cm

Width 

17.6 in.; 44.6 cm

Height 

5.4 in.; 13.6 cm

Expansion Cabinet with no Media Bay Modules 31.9 lb.; 14.5 kg
Expansion Cabinet with 6 Media Bay Modules 46.2 lb.; 21 kg

Power requirements

Auto-sensing

Auto-sensing

300 Watts

350 Watts

90/264 VAC

90/264 VAC

6.0 A/3.0 A

7.0 A/3.5 A

60/50 Hz

60/50 Hz

Environmental ranges

Operating temperature

32º to 104ºF; 0º to 40ºC

Operating humidity

10% to 90% relative humidity, 
non-condensing

Storage temperature

-67º to 158ºF; -55º to 70ºC

Storage humidity

Up to 95% relative humidity

Mounting options

Rack-mount (standard 19-inch rack); Stand-alone (feet included);
Wall-mount (optional wall-mount bracket available separately)

Telephones and Adapters

Station Sets

T7100

8.1D x 7Wx3.5H

1,000 ft.

2,600 ft.

T7208

8.1D x 7.7Wx3.5H

1,000 ft

2,600 ft.

T7316E

8.1D x 10.3Wx3.5H

1,000 ft.

2,600 ft.

T24 KIM

7.7D x 3.6Wx3.4H

Connects to T7316E

NACU

12.5 x 12Wx2H

1,000 ft.

2,600 ft.

IP Stations

• Nortel IP Phone 1120E
• Nortel IP Phone 1140E
• Nortel IP Phone 2007
• Nortel IP Phone 2004
• Nortel IP Phone 2002
• Nortel IP Phone 2001
• Nortel IP Phone 2033
• Nortel IP Softphone 2050 (PC or Laptop)

T24 Kim—requires T7316E

T24 EKIM (Enhanced KIM — used as CAP) — max. 12 positions per
system; max 4 EKIMs per position
T24 OKIM (Ordinary KIM — used for answer/DSS/BLF) — unlimited per
system; max 4 OKIMs without power supply per position; max 9
OKIMs with power supply per position

WLAN

• WLAN Handset 2210
• WLAN Handset 2211
• WLAN Handset 2212
• WLAN IP Telephony Manager 2245
• WLAN Applications Gateway 2246
• Nortel Mobile Voice Client 2050

Digital Mobility

• Digital Mobility Controller
• Digital Mobility Basestation
• Digital Mobility Repeater
• Digital Mobility Handsets 7420, 743x, 744x, 413x, 414x

Mobility — Cordless

T7406: 3 handsets per basestation, 2 basestations per system

Accessories

BST Doorphone
Norstar Audio Conferencing Unit (NACU)
Station Auxiliary Power Supply (SAPS)
ATA-2 Analog Terminal Adapter (separate models for NA, Europe 
and Australia)