Fluke 190-102/S 2-channel hand-held oscilloscope, ScopeMeter® 190 series II, hand-held 4025383 ユーザーズマニュアル
製品コード
4025383
Using the Scope and Meter
Navigating a Menu
1
13
Navigating a Menu
The following example shows how to use the test tool's
menus to select a function. Subsequently follow steps
1 through 4 to open the scope menu and to choose an
item.
menus to select a function. Subsequently follow steps
1 through 4 to open the scope menu and to choose an
item.
1
SCOPE
Press the
SCOPE
key to display
the labels that define the present
use for the four blue function keys
at the bottom of the screen.
use for the four blue function keys
at the bottom of the screen.
Note
To hide the labels for full screen view, press the
CLEAR
key. Press the
CLEAR
key again to show
the labels again. This toggling enables you to
check the labels without affecting your settings.
check the labels without affecting your settings.
2
F4
Open the Waveform Options
menu. This menu is displayed at
the bottom of the screen. Actual
settings are shown on a yellow
background.
the bottom of the screen. Actual
settings are shown on a yellow
background.
SCOPE
ENTER
ENTER
ENTER
ENTER
1
3b
3b
3b
3a
3a
Figure 4. Basic Navigation
3a
3b
3b
ENTER
Use the blue arrow keys to
highlight the item. Press the blue
ENTER
key to accept the selection.
The next option will be selected.
After the last option the menu will
be closed.
Note
Pressing the blue arrow keys lets you to step
through a menu without changing the settings.
through a menu without changing the settings.
To exit the menu at any moment press
F4
(CLOSE)