Analog Devices ADF4113HV Evaluation Board EV-ADF4113HVSD1Z EV-ADF4113HVSD1Z データシート
製品コード
EV-ADF4113HVSD1Z
Evaluation Board User Guide
UG-165
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Integer-N PLL Frequency Synthesizer
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 24
FEATURES
Self-contained evaluation board, including synthesizer, VCO,
TCXO for reference frequency, and loop filter
Designed for 1 MHz PFD frequency and 50 kHz loop
bandwidth
Accompanying software allows complete control of
synthesizer functions from a PC
EVALUATION KIT CONTENTS
board
CD that includes
Self-installing software that allows users to control the
board and exercise all functions of the device
Electronic version of the
data sheet
Electronic version of the
user guide
ADDITIONAL EQUIPMENT
PC running Windows XP or more recent version
board (system demonstration platform, serial only)
Spectrum analyzer
Oscilloscope (optional)
Oscilloscope (optional)
DOCUMENTS NEEDED
data sheet
REQUIRED SOFTWARE
Analog Devices Int-N PLL software (Revision 7.3.1 or higher)
GENERAL DESCRIPTION
This evaluation board allows the user to evaluate the performance
of the
of the
frequency synthesizer for phase-locked loops
(PLLs). Figure 1 shows the board, which contains the
synthesizer, an edge-mounted SMA connector for the RF output
signal, power supply connectors, a temperature compensated
reference oscillator (TCXO) of 25 MHz frequency, and an SDP
connector. There is also a loop filter (50 kHz) and a voltage control-
led oscillator (VCO), the Mini-Circuits ROS-2260W+, on board.
The package contains Windows®-based software (XP or later) to
allow easy programming of the synthesizer.
This evaluation board requires an
signal, power supply connectors, a temperature compensated
reference oscillator (TCXO) of 25 MHz frequency, and an SDP
connector. There is also a loop filter (50 kHz) and a voltage control-
led oscillator (VCO), the Mini-Circuits ROS-2260W+, on board.
The package contains Windows®-based software (XP or later) to
allow easy programming of the synthesizer.
This evaluation board requires an
board (shown in
Figure 1, but not supplied with the evaluation board kit). The
SDP-S allows software programming of the
SDP-S allows software programming of the
device.
EVALUATION BOARD
Figure 1.
09150-
001
SDP-S
(TO BE PURCHASED
SEPARATELY)