Analog Devices ADP121 Evaluation Board ADP121UJZ-REDYKIT ADP121UJZ-REDYKIT データシート
製品コード
ADP121UJZ-REDYKIT
RedyKit User Guide
UG-052
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
RedyKit™ for the ADP121 LDO
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 4
FEATURES
All-voltage option for evaluation
Surface-mount ADP121 5-lead TSOP parts that can be easily
Surface-mount ADP121 5-lead TSOP parts that can be easily
soldered to the evaluation boards
Additional parts for prototyping
ADP121UJZ-REDYKIT CONTENTS
1 each ADP121-2.8-EVALZ evaluation board V
OUT
2.8 V
1 each ADP121-3.3-EVALZ evaluation board V
OUT
3.3 V
3 each ADP121 voltage options in a labeled bag
08
47
5-
0
01
Figure 1.
GENERAL DESCRIPTION
The ADP121UJZ-REDYKIT allows simplified prototyping and
evaluation and is available for every standard fixed output voltage
option in the
evaluation and is available for every standard fixed output voltage
option in the
product family. The kit allows the user to
evaluate the voltage options with one easy to order kit.
All surface-mount ADP121 parts are sorted and stored in the
kit with the Analog Devices, Inc., part number and fixed output
voltage clearly printed on each zip-top bag.
kit with the Analog Devices, Inc., part number and fixed output
voltage clearly printed on each zip-top bag.
The kit can be used in the engineering lab to evaluate required
voltage options. If other voltage options must be evaluated, a
different part from the kit can be easily soldered onto one of the
evaluation boards supplied with the kit.
voltage options. If other voltage options must be evaluated, a
different part from the kit can be easily soldered onto one of the
evaluation boards supplied with the kit.
The ADP121UJZ-REDYKIT is available with fixed 2.8 V and 3.3 V
evaluation boards. The kit also contains additional parts for
prototyping. The kit enclosure, which contains individually
packaged parts and the two evaluation boards, is packaged in
an ESD foam pad inside a treated cardboard box that measures
8.7" (L) × 7.9" (W) × 1.75"(H), that is, 22 cm (L) × 20 cm (W) ×
4.5 cm (H).
evaluation boards. The kit also contains additional parts for
prototyping. The kit enclosure, which contains individually
packaged parts and the two evaluation boards, is packaged in
an ESD foam pad inside a treated cardboard box that measures
8.7" (L) × 7.9" (W) × 1.75"(H), that is, 22 cm (L) × 20 cm (W) ×
4.5 cm (H).
.
TYPICAL APPLICATION CIRCUIT
NC = NO CONNECT
1
2
3
5
4
0
84
75-
0
02
1µF
1µF
V
OUT
= 1.8V
V
IN
= 2.3V
VOUT
NC
VIN
GND
EN
OFF
ON
Figure 2.