Analog Devices ADP1048 600W POWER PFC Evaluation Board ADP1048DC1-EVALZ ADP1048DC1-EVALZ データシート

製品コード
ADP1048DC1-EVALZ
ページ / 12
 
ADP1047/ADP1048 Daughter Card 
Evaluation Board
ADP1047/8DC1-EVALZ                                                         PRD1372 
 
 
Rev. 1.0 
Reference designs are as supplied “as is” and without warranties of any kind, express, implied, or 
statutory including, but not limited to, any implied warranty of merchantability or fitness for a 
particular purpose. No license is granted by implication or otherwise under any patents or other 
intellectual property by application or use of reference designs. Information furnished by Analog 
Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog 
Devices for its use, nor for any infringements of patents or other rights of third parties that may 
result from its use. Analog Devices reserves the right to change devices or specifications at any 
time without notice. Trademarks and registered trademarks are the property of their respective 
owners. Reference designs are not authorized to be used in life support devices or systems. 
 
 
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 
www.analog.com
  
Fax: 781.461.3113 
©2009 Analog Devices, Inc. All rights reserved. 
FEATURES 
ADP1047/ADP1048 Daughter Card with I2C interface 
Retrofit controller to any topology or existing design 
Software GUI 
Low component count 
 
ADP1047/ADP1048 EVALUATION BOARD OVERVIEW
 
The daughter card evaluation board allows the ADP1047/ADP1048 to be quickly evaluated in any existing  switching power 
supply application. Using the daughter card and its accompanying software, the IC can be interfaced to any PC running 
Windows 2000/NT/XP/Vista/7 via the computers USB port.  
 
The daughter card can be connected to any existing ADP1047/ADP1048 evaluation board or reference design.  
 
It can also be connected to any power supply as a replacement for the existing controller. The daughter card has a connector 
through which the pin outs of the ADP1047/ADP1048 can be probed. The software GUI allows control and read/write 
functionality of the ADP1047/adp1048 internal registers to modify, for example, the PWM settings or over current protection 
limits.  
 
 
 
Figure 1 - Daughter card with pin outs of ADP1047/ADP1048