Analog Devices AD5061 Evaluation Board EVAL-AD5061EBZ EVAL-AD5061EBZ データシート
製品コード
EVAL-AD5061EBZ
Evaluation Board for 14-/16-Bit, Serial
Input, V
OUT
NanoDACs™
EVAL-AD5040EB/EVAL-AD506xEB
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.
FEATURES
The AD5040/AD506x devices offer a relative accuracy
specification of ±1 LSB and operation is guaranteed monotonic
with a ±1 LSB DNL specification.
specification of ±1 LSB and operation is guaranteed monotonic
with a ±1 LSB DNL specification.
Full-featured evaluation board for the AD5040/AD506x
Operates from single 2.7 V to 5.5 V supplies
On-board reference
Operates from single 2.7 V to 5.5 V supplies
On-board reference
The AD5040 and AD506x devices use a versatile 3-wire serial
interface that operates at clock rates up to 30 MHz and are
compatible with standard SPI®, QSPI™, MICROWIRE™, and
DSP interface standards. The reference for the AD5040 and
AD506x devices is supplied from an external V
interface that operates at clock rates up to 30 MHz and are
compatible with standard SPI®, QSPI™, MICROWIRE™, and
DSP interface standards. The reference for the AD5040 and
AD506x devices is supplied from an external V
REF
pin. A
reference buffer is also provided on-chip. The AD5040/AD506x
incorporate a power-on reset circuit that ensures the DAC
output powers up to midscale or zero scale and remains there
until a valid write occurs.
incorporate a power-on reset circuit that ensures the DAC
output powers up to midscale or zero scale and remains there
until a valid write occurs.
Direct hookup to USB port of PC
PC software for control of DAC
Power-on reset to midscale or zero scale
3 power-down functions
PC software for control of DAC
Power-on reset to midscale or zero scale
3 power-down functions
PACKAGE CONTENTS
AD5040/AD506x evaluation board
AD5040/AD506x device
3 V reference (ADR423)
CD including
AD5040/AD506x device
3 V reference (ADR423)
CD including
The AD5040 and the AD506x devices contain a power-down
feature that reduces the current consumption of the device and
provides software-selectable output loads while in power-down
mode. The AD5061 is a low power, single 16-bit buffered
voltage-out DAC. The AD5061 part offers a relative accuracy
specification of ±4 LSB, and operation is guaranteed monotonic
with a ±1 LSB DNL specification. The AD5063 is a low power,
single 16-bit buffered voltage-out DAC and comes with
on-board resistors in a 10-lead MSOP, allowing bipolar signals
to be generated with an output amplifier. The AD5062 is a low
power, single 16-bit unbuffered voltage-out DAC. The AD5062
offers a relative accuracy specification of ±1 LSB, and operation
is guaranteed monotonic with a ±1 LSB DNL specification. An
external reference can also be applied via an SMB input
connector. The evaluation board is powered via terminal blocks.
feature that reduces the current consumption of the device and
provides software-selectable output loads while in power-down
mode. The AD5061 is a low power, single 16-bit buffered
voltage-out DAC. The AD5061 part offers a relative accuracy
specification of ±4 LSB, and operation is guaranteed monotonic
with a ±1 LSB DNL specification. The AD5063 is a low power,
single 16-bit buffered voltage-out DAC and comes with
on-board resistors in a 10-lead MSOP, allowing bipolar signals
to be generated with an output amplifier. The AD5062 is a low
power, single 16-bit unbuffered voltage-out DAC. The AD5062
offers a relative accuracy specification of ±1 LSB, and operation
is guaranteed monotonic with a ±1 LSB DNL specification. An
external reference can also be applied via an SMB input
connector. The evaluation board is powered via terminal blocks.
Self-installing software that allows you to control the DAC
and exercise all functions of the device
Electronic version of device data sheet
Electronic version of EVAL-AD5040EB/EVAL-AD506xEB
Electronic version of EVAL-AD5040EB/EVAL-AD506xEB
data sheet
OP97 op amp (provided with EVAL-AD5063 only)
GENERAL DESCRIPTION
This data sheet describes the evaluation board for evaluating
the AD5040, AD5060, AD5061, AD5062, and AD5063
nanoDACs. These devices are low power, single 14-/16-bit
buffered voltage-out DACs. Operating from single 2.7 V to
5.5 V supplies, the devices are well suited to battery-powered
and other applications.
the AD5040, AD5060, AD5061, AD5062, and AD5063
nanoDACs. These devices are low power, single 14-/16-bit
buffered voltage-out DACs. Operating from single 2.7 V to
5.5 V supplies, the devices are well suited to battery-powered
and other applications.
FUNCTIONAL BLOCK DIAGRAM
06
14
1-
0
01
USB
CONNECTOR
EEPROM
BUFFER
CONTROLLER
CY7C68013
SPI
V
OUT
AGND
DACGND
V
DD
REFIN
V
DD
REFIN
POWER
SUPPLY INPUTS
AGND
AD5040/AD506x
14-/16-BIT DAC
3V
VOLTAGE
REFERENCE
SMB
CONNECTORS
Figure 1.