Analog Devices ADP2323 Evaluation Board ADP2323-EVALZ ADP2323-EVALZ データシート
製品コード
ADP2323-EVALZ
Evaluation Board User Guide
UG-310
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
Evaluation Board for the
, Dual 3 A, 20 V, Synchronous Step-Down
Regulator with Integrated High-Side MOSFET
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 12
FEATURES
Input voltage: 4.5 V to 20 V
±1% output voltage accuracy
Integrated 90 mΩ typical
±1% output voltage accuracy
Integrated 90 mΩ typical
on-resistance high-side MOSFET
Flexible output configuration
Dual output: 3 A/3 A
Parallel single output: 6 A
Parallel single output: 6 A
Programmable switching frequency: 250 kHz to 1.2 MHz
External synchronization input with programmable phase
External synchronization input with programmable phase
shift, or internal clock output
Selectable PWM or PFM mode operation
Adjustable current limit for small inductor
External compensation and soft start
Startup into precharged output
Adjustable current limit for small inductor
External compensation and soft start
Startup into precharged output
GENERAL DESCRIPTION
The
evaluation board is a complete, dual, 3 A step-down
with a near ideal printed circuit board (PCB) layout.
The two pulse-width modulation (PWM) channels can be
configured to deliver dual, 3 A outputs or a parallel-to-single, 6 A
output. The switching frequency can be programmed between
250 kHz and 1.2 MHz, or it can be synchronized to an external
clock with a programmed 60°, 90°, or 120° phase shift, which
provides the possibility for a stackable multiphase power solution.
configured to deliver dual, 3 A outputs or a parallel-to-single, 6 A
output. The switching frequency can be programmed between
250 kHz and 1.2 MHz, or it can be synchronized to an external
clock with a programmed 60°, 90°, or 120° phase shift, which
provides the possibility for a stackable multiphase power solution.
The outputs
of the
evaluation board are preset to 1.2 V
and 3.3 V for Channel 1 and Channel 2, respectively. With the
PWM mode selected, the switching frequency is set to 500 kHz.
Different output voltage settings and configurations can be
achieved by changing appropriate passive components or
jumper settings. The ambient temperature operating range is
−40°C to +85°C.
PWM mode selected, the switching frequency is set to 500 kHz.
Different output voltage settings and configurations can be
achieved by changing appropriate passive components or
jumper settings. The ambient temperature operating range is
−40°C to +85°C.
dual regulator are provided in the
data sheet, available from Analog Devices, Inc., which
should be consulted in conjunction with this user guide.
ADP2323 DEMO BOARD
10
1
1
3-
001
Figure 1.