Analog Devices ADF4360-6 Evaluation Board EV-ADF4360-6EB1Z EV-ADF4360-6EB1Z データシート
製品コード
EV-ADF4360-6EB1Z
Evaluation Board User Guide
UG-103
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Evaluation Board for
Integrated PLL and VCO Frequency Synthesizer
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 12
FEATURES
Self-contained board for generating RF frequencies
Flexibility for reference input, PFD frequency, and loop
Flexibility for reference input, PFD frequency, and loop
bandwidth
Accompanying software allows complete control of
synthesizer functions from a PC
USB/battery-operated 9 V supplies
Typical phase noise performance of −141 dBc/Hz at 3 MHz offset
Typical spurious performance of −65 dBc at 200 kHz offset
Typical phase noise performance of −141 dBc/Hz at 3 MHz offset
Typical spurious performance of −65 dBc at 200 kHz offset
(1.2 GHz output)
GENERAL DESCRIPTION
The ADF4360-6EBZ1 evaluation board is designed to allow the
user to evaluate the performance of the
user to evaluate the performance of the
frequency
synthesizer consisting of an integrated PLL and VCO (see Figure 1).
It contains the ADF4360-6BCPZ, a USB connector, and SMA
connectors for the RF outputs. Unpopulated SMA footprints are
available for the power supplies, the chip enable (CE), and the
external reference input. The evaluation board also contains the
loop filter to complete the PLL. It can be modified as necessary for
the PLL requirements of the user. A USB cable is included with
the board to allow software programmability from a PC.
The package also contains a CD with Windows® software to allow
quick, user-friendly programming of the synthesizer. The CD
contains additional PLL data sheets, technical notes, articles, and
ADIsimPLL™ V3.4 (Analog Devices, Inc., PLL simulation
software). More information is available at
It contains the ADF4360-6BCPZ, a USB connector, and SMA
connectors for the RF outputs. Unpopulated SMA footprints are
available for the power supplies, the chip enable (CE), and the
external reference input. The evaluation board also contains the
loop filter to complete the PLL. It can be modified as necessary for
the PLL requirements of the user. A USB cable is included with
the board to allow software programmability from a PC.
The package also contains a CD with Windows® software to allow
quick, user-friendly programming of the synthesizer. The CD
contains additional PLL data sheets, technical notes, articles, and
ADIsimPLL™ V3.4 (Analog Devices, Inc., PLL simulation
software). More information is available at
EVALUATION BOARD PHOTOGRAPH
08889-
001
Figure 1.