Analog Devices AD5373 Evaluation Board EVAL-AD5373EBZ EVAL-AD5373EBZ データシート
製品コード
EVAL-AD5373EBZ
Evaluation Board for
AD5370/AD5372/AD5373
Preliminary Technical Data
EVAL-AD5370/2/3EBZ
Rev. PrC
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703
© 2008 Analog Devices, Inc. All rights reserved.
FEATURES
Full-Featured Evaluation Board for the
AD5370/AD5372/AD5373
USB Interface
PC Software for Register Programming
Various Reference Voltages Available
Stand-Alone Operation
AD5370/AD5372/AD5373
USB Interface
PC Software for Register Programming
Various Reference Voltages Available
Stand-Alone Operation
INTRODUCTION
This Technical Note describes the operation and functionality
of the Evaluation Board for the AD5370, AD5372 and AD5373.
As these 3 parts are pin compatible the same evaluation board is
used for all. AD537x will be used throughout this technical note
to refer to the actual multi-channel DAC used on the board.
This note should be used in conjunction with the data sheet of
the appropriate DAC. The evaluation board allows the
this link is in position C the voltage on SMB connector
ed easily. The evaluation board can be used as a stand alone
board with control coming from an external DSP or micro-
controller or it can be connected to a PC. Software is provided
which can be used to program the registers of the AD537x.
Control of the AD537x is achieved via a USB interface
of the Evaluation Board for the AD5370, AD5372 and AD5373.
As these 3 parts are pin compatible the same evaluation board is
used for all. AD537x will be used throughout this technical note
to refer to the actual multi-channel DAC used on the board.
This note should be used in conjunction with the data sheet of
the appropriate DAC. The evaluation board allows the
this link is in position C the voltage on SMB connector
ed easily. The evaluation board can be used as a stand alone
board with control coming from an external DSP or micro-
controller or it can be connected to a PC. Software is provided
which can be used to program the registers of the AD537x.
Control of the AD537x is achieved via a USB interface
FUNCTIONAL BLOCK DIAGRAM
USB
INTERFACE
AD537x
DIN
SDO
SDO
SCLK
SYNC
LDAC
CLR
SYNC
LDAC
CLR
RESET
B
U
F
F
E
R
LK1
(USB Used)
HEADER
VOUT0
VOUT1
VOUT1
:
:
:
:
:
:
:
VOUTn
H
E
A
D
E
R
VREF0
VREF1
VREF2
VREF1
VREF2
5V
3V
EXT VREF
VREF
SELECTION
EVAL-AD5370_2_3EB
D
V
C
C
D
G
N
D
V
D
D
A
G
N
D
V
S
S
Figure 1. Functional Block Diagram