Analog Devices AD2S1210 Evaluation Board EVAL-AD2S1210EDZ EVAL-AD2S1210EDZ データシート
製品コード
EVAL-AD2S1210EDZ
Evaluation Board for 10-Bit to 16-Bit R/D
Converter with Reference Oscillator
EVAL-AD2S1210
Rev. 0
Evaluation boards are only intended for device evaluation and not for production purposes.
Evaluation boards are supplied “as is” and without warranties of any kind, express, implied, or
statutory including, but not limited to, any implied warranty of merchantability or fitness for a
particular purpose. No license is granted by implication or otherwise under any patents or other
intellectual property by application or use of evaluation boards. Information furnished by Analog
Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result
from its use. Analog Devices reserves the right to change devices or specifications at any time
without notice. Trademarks and registered trademarks are the property of their respective owners.
Evaluation boards are not authorized to be used in life support devices or systems.
Evaluation boards are supplied “as is” and without warranties of any kind, express, implied, or
statutory including, but not limited to, any implied warranty of merchantability or fitness for a
particular purpose. No license is granted by implication or otherwise under any patents or other
intellectual property by application or use of evaluation boards. Information furnished by Analog
Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may result
from its use. Analog Devices reserves the right to change devices or specifications at any time
without notice. Trademarks and registered trademarks are the property of their respective owners.
Evaluation boards are not authorized to be used in life support devices or systems.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2009 Analog Devices, Inc. All rights reserved.
FEATURES
Full-featured evaluation board for the AD2S1210
EVAL-CED1Z compatible
Standalone capability
Various linking options
PC software for control and data analysis when used with the
EVAL-CED1Z compatible
Standalone capability
Various linking options
PC software for control and data analysis when used with the
EVAL-CED1Z
GENERAL DESCRIPTION
This data sheet describes the evaluation board for the
which is a complete, 10-bit to 16-bit resolution tracking resolver-
to-digital converter, integrating an on-board programmable
to-digital converter, integrating an on-board programmable
sinusoidal oscillator that provides sine wave excitation for
resolvers. Full details about the part are available in the
AD2S1210 data sheet from Analog Devices, Inc., which should
be consulted in conjunction with this data sheet when using the
evaluation board.
resolvers. Full details about the part are available in the
AD2S1210 data sheet from Analog Devices, Inc., which should
be consulted in conjunction with this data sheet when using the
evaluation board.
On-board components include the
quad op amp,
the
voltage monitor, the PI74ALVTC16245AE
bidirectional transceiver, and the 74HC573 Octal D-type
transparent latch.
transparent latch.
FUNCTIONAL BLOCK DIAGRAM
SIN
SINLO
COS
COSLO
EXC
EXC
DB0 TO DB15
A, B, NM, DIR
DOS, LOT
CS
RD
SAMPLE
WR/FSYNC
DATA BUS
DB0 TO DB15
9
6
-W
A
Y ED
G
E
C
O
N
N
EC
T
O
R
EXTERNAL SUPPLIES
AV
DD
DV
DD
V
DRIVE
AD2S1210
SAMPLE,
WR/FSYNC,
SCLK, SDI,
SDO, A0, A1,
RES0, RES1
A0, A1, RES0,
RES1, RESET
RES1, RESET
26-WAY CONNECTOR
10-WAY CONNECTOR
08
03
6-
00
1
Figure 1.