C Control I Unit-M 2.0 BASIC 5 Vdc Inputs / outputs 16 x digital I/Os/8 x analog or digital I/Os/2 x analogue outputs (s 198822 データシート

製品コード
198822
ページ / 2
C-Control / BASIC computer Unit STATION 2.0 
Best.-Nr. 19 88 22 
Der C-Control / BASIC computer STATION 2.0 is the anvanced version of the old Ubit STATION and is based on the UNIT M 
2.0  
Technical Data 
 
Operating voltage : 
230V AC ( alternate 12V DC ) 
Power consumption: 
app. 3.5W 
Currentconsumption DC: 
60 to 210 mA 
max. load current at 5V Out: 
50 mA 
occupied M 2.0 Resources: 
Port 9-16 and AD6 bis AD8 
Mounting: 
DIN Rail corr. DIN 50 022, 35mm 
Temperature range 
5 to 40 Grad 
Microcontroller: 
32 MHz clock (8 MHz Busclock) 
Speed: 
app. 50us per BASIC instruction ( > 20000 I/s) 
Memory: 
FLASH Memory 10 KByte Userprogramm 
RAM: 
64/140 Bytes user RAM (CCBASIC/BASIC++) 
A/D-Ports 
 
- 8 x 8 Bit A/D, 0-5 V also as digital port usable  
- Reference voltageis operation voltage or can be applied from external  
- Input current app. 10uA during conversation  
- Accuracy +- 1digit  
Digitalports 
 
- 16 programmable as input or output 
- Pullup resistors are switchable  
- Voltages (0,2 mA load at output):  
- (Ub - 0,3 V) < Uout,high < (Ub - 0,1 V) 
- 0,1 V < Uout,low < 0,3 V 
- (0,7* Ub) < Uin,high < Ub 
- 0 V < Uin,low < (0,2* Ub) 
- maximum load: +/- 10 mA  
D/A-Converter 
 
- 2 PWM outputs, PWM-Rate 1953 Hz 
- alternate function for servocontrol is possible  
DCF/ FREQ1-Input 
 
- Digital port with internal 10k pullup resistor prepared for connecting a DCF77 active antenna with open collctor output or 
frequency measurement up to 30kHz 
- alternate function as eventcounter is possible  
FREQ2-Eingang 
 
- Digital port with internal 10k pullup resistor for frequency measurement up to 30kHz 
- alternate function as eventcounter is possible  
IRQ-Input 
 
- Interrupt input IRQ (can be replaced by other interrupt sources) 
- (20ms Timer,RF Moule, IR Module ab OS V2.03) 
Serial Interface 
 
- 9600 Baud, 8 Bit, 1 startbit, 1 stoppbit, no parity no Handshake, CMOS/TTL-Level  
- (19k2, 38k4 possible) 
- available at claps and Sub-D Connector 
- intercace activity control LED is available  
Relay
 
- 4 Relay 230V/6A (NO)  
LCD
 
- 2 lines, 16 characters with switchable Backlight  
Seite 1 von 2
STATION 2.0: Technische Spezifikationen
14.06.2006
file://T:\Neu\STATION%202_0%20Technische%20Spezifikationen.htm