Atmel ATSAM3S-EK2 データシート
64
Atmel AVR2055
8348D-AVR-06/12
Parameter
Value
Note
IDE
Eclipse IDE for C/C++ ,
YAGARTO toolchain (GCC
4.6.2
(1)
) and AT91-ISP
v1.12
OR
IAR Embedded Workbench
IAR Embedded Workbench
ARM 6.30
(with IAR C/C++ Compiler
for ARM
v6.30.6.53336/W32
(1)
)
Required to develop applications
using API and to upload firmware
images through JTAG (see
Section
Java virtual machine
Java Runtime Environment
(JRE) 6, or later
Note:
1. Users are strongly encouraged to use the specified version of IAR toolchain.
Other versions are not supported and may not work with the BitCloud PS SDK.
12.1.4 Installing the SDK
To install the SDK, proceed with the following installation instructions:
1. Download the BitCloud PS SDK, and install it by unzipping the
1. Download the BitCloud PS SDK, and install it by unzipping the
BitCloud_PS_SAM3S_EK_version.zip
file into an empty folder while ensuring
there are no blank spaces in the path to it (that is, avoid having folder names
such as Program Files/, My Documents/, and similar in the installation path)
NOTE
If the SDK installation path contains any blank spaces in its directory names, errors
indicating path issues will occur when compiling reference and custom applications
with such SDK.
2. The SDK folders and files will be created, as described in
2. The SDK folders and files will be created, as described in
3. Install the selected IDE
a. For Eclipse IDE and YAGARTO:
a. Install Eclipse IDE for C/C++
, if not already installed on
your PC.
b. Install YAGARTO ARM cross-compiler toolchain
, if not
already installed on your PC. Be sure to install only the
supported version of the YAGARTO toolchain, as specified in
b. For IAR Embedded Workbench ARM:
a. Install IAR Embedded Workbench for ARM
, if not already
installed on your PC.
b. Add a Windows environment variable callnamed
IAR_ARM_HOME, and set its value to the IAR Embedded
Workbench installation directory (for a default installation, it is
C:\Program Files\IAR Systems\Embedded Workbench
6.30
). To do this, go to
Control Panel > System >
Advanced > Environment Variables
, click
New
below
System variables
list and enter
Variable Name
and
Variable Value
. This step is required if you plan to build
embedded images using IAR Embedded Workbench from the
command line.
, if not already installed on the PC
, if not already installed on
the PC