Atmel ATSTK600 500 Starter Kit and Development System. ATSTK600 ATSTK600 データシート
製品コード
ATSTK600
AVR600: STK600 Expansion, routing and socket
boards
1 Introduction
This application note describes the process of developing new routing, socket and
expansion cards for the STK
expansion cards for the STK
®
600. It also describes the physical parameters for
creating such cards.
The STK600 starter kit from Atmel has a sandwich design to match a specific part
package and pin out to the generic pin headers. It also features an expansion area
where most part pins are available.
package and pin out to the generic pin headers. It also features an expansion area
where most part pins are available.
While the variety of IC packages is relatively limited, the number of possible pin
outs increases rapidly with the number of pins. i.e. a 6 pin IC can have 720 (6!)
different pin outs!
outs increases rapidly with the number of pins. i.e. a 6 pin IC can have 720 (6!)
different pin outs!
The routing / socket card design provides a low cost solution to support upcoming
devices as the socket is the cost driving factor.
devices as the socket is the cost driving factor.
STK600 users might also want to create their own routing cards to include
specialized hardware to prototype their design.
specialized hardware to prototype their design.
Figure 1-1. STK600 router and socket card
8-bit
Microcontrollers
Application Note
Rev. 8170A-AVR-08/08